Jump to content

Windows Install/reinstall and Raid 0

onehp12
By onehp12
in Windows
 Share
Posted

Hello Everyone.

I have a Windows instalation on an ssd and a Raid 0 setup in Intel RST.

So say i want to reinstall (Or Refresh) my windows 8.1, or i want to install windows 10 on the ssd. Will doing either of these destroy my raid ?

 

Thanks.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
14 minutes ago, onehp12 said:

Hello Everyone.

I have a Windows instalation on an ssd and a Raid 0 setup in Intel RST.

So say i want to reinstall (Or Refresh) my windows 8.1, or i want to install windows 10 on the ssd. Will doing either of these destroy my raid ?

 

Thanks.

Is the raid set up through your BIOS/UEFI?

 

Edited by VoyexTech

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I Belive so.

 

It it in Device Manager as "Intel Raid 0 Volume"

 

so yeah i belive so. i didn't make it with windows, that i'm sure off.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
16 minutes ago, onehp12 said:

I Belive so.

 

It it in Device Manager as "Intel Raid 0 Volume"

 

so yeah i belive so. i didn't make it with windows, that i'm sure off.

 Ok then you should be fine with a windows refresh/reinstall.

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Okay, i'll take your word for it.

 

Thanks a lot for the quick respons.

 

i'll post what happend.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, onehp12 said:

Okay, i'll take your word for it.

 

Thanks a lot for the quick respons.

 

i'll post what happend.

Ok if you have an issue with the raid set up I'll try and help you but I will have to go in 30-45 min then I'll be back an hour or so after that and I'll help you if you have any issues.

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Ohh, Probably won't do it today.

i don't have the time. but i'll sit down and do it tomorrow.

 

i will inform you then.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, onehp12 said:

Ohh, Probably won't do it today.

i don't have the time. but i'll sit down and do it tomorrow.

 

i will inform you then.

 

 

Ok If you have any issues just say so and I will help

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Hey.

Just quickly. udating the BIOS on the motherboard. will that break the RAID.

i'm assuming it would. the Motherboard is a "Asus Sabertooth z97 Mark 1"

 

Thank You.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 4/27/2016 at 5:01 PM, onehp12 said:

Hey.

Just quickly. udating the BIOS on the motherboard. will that break the RAID.

i'm assuming it would. the Motherboard is a "Asus Sabertooth z97 Mark 1"

 

Thank You.

Yes. Yes it will

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Windows

×