new build problems 6700k

[utrop17]

he every body.

my build is:

6700k

980ti g1 gigabyte

asus z170 deluxe

hx850i corsair 

 

and i have the next problem..

 

my cpu no up at 800 mhz, i tried with resert windows, bios, use it the software of asus for auto overclock and nothing the cpu never up at 800 mhz,

even with benchmarcks (unigine valley, fire strikes, cpu-z)

and obviously the fps are under 30 even with 1080P and minimun resolutions

 

i dont have what more try  right now i just want burn the cpu 

 

unigine valley in ultra and in low is the same.... i just no possible 

[stealth80]

check your core speed multiplier in the bios, it should be around 42 not 8

[Starelementpoke]

10 hours ago, utrop17 said:

he every body.

my build is:

6700k

980ti g1 gigabyte

asus z170 deluxe

hx850i corsair 

 

and i have the next problem..

 

my cpu no up at 800 mhz, i tried with resert windows, bios, use it the software of asus for auto overclock and nothing the cpu never up at 800 mhz,

even with benchmarcks (unigine valley, fire strikes, cpu-z)

and obviously the fps are under 30 even with 1080P and minimun resolutions

 

i dont have what more try  right now i just want burn the cpu 

 

unigine valley in ultra and in low is the same.... i just no possible 

Reseat your cooler.

[Moonzy]

1) check power option and make sure your cpu power isnt limited to only 5%

2) check bios to make sure your cpu's multiplier is set to auto (or default)

3) check if u enabled intel speed step

[jett473]

10 hours ago, utrop17 said:

he every body.

my build is:

6700k

980ti g1 gigabyte

asus z170 deluxe

hx850i corsair 

 

and i have the next problem..

 

my cpu no up at 800 mhz, i tried with resert windows, bios, use it the software of asus for auto overclock and nothing the cpu never up at 800 mhz,

even with benchmarcks (unigine valley, fire strikes, cpu-z)

and obviously the fps are under 30 even with 1080P and minimun resolutions

 

i dont have what more try  right now i just want burn the cpu 

 

unigine valley in ultra and in low is the same.... i just no possible 

check to make sure you didn't actually hit a "slow PC" switch on your motherboard.

 

It's a switch that slows your CPU down to 800mhz to allow for easy Overclocking whenever you're trying to go with a /super/ high one.

 

ive heard people go through things like this a few times now and so far almost every time it was that.

[NumLock21]

Update bios and reset bios back to defaults.

Reinstall your windows, might be a corrupted install where power management is acting up.

Other things to look for, check for bent pin, dust that might get in the socket or finger prints on the cpu contact pads.

[utrop17]

i guys thanks for all the answer, 

 

 

4 hours ago, jett473 said:

check to make sure you didn't actually hit a "slow PC" switch on your motherboard.

 

It's a switch that slows your CPU down to 800mhz to allow for easy Overclocking whenever you're trying to go with a /super/ high one.

 

ive heard people go through things like this a few times now and so far almost every time it was that.

i dont know what switch can be that, i have 3 one for the type of cooler, one for power consumation (is off) and another for auto OC de rams.

 

4 hours ago, NumLock21 said:

Update bios and reset bios back to defaults.

Reinstall your windows, might be a corrupted install where power management is acting up.

Other things to look for, check for bent pin, dust that might get in the socket or finger prints on the cpu contact pads.

i already reinstall the windows, and im sure i dont touch the cpu or the pins

[NumLock21]

30 minutes ago, utrop17 said:

i guys thanks for all the answer, 

 

 

i dont know what switch can be that, i have 3 one for the type of cooler, one for power consumation (is off) and another for auto OC de rams.

 

i already reinstall the windows, and im sure i dont touch the cpu or the pins

my system, when it resumes from sleep, the cpu gets stuck at 800MHz no matter what, but it goes back to normal when I restart. Too lazy to reinstall the OS cause I have too much programs and settings that needs to be reconfigured.

 

[utrop17]

but somebody have any idea where can be that swicth?¿ because in the manual i dont see it. and i will try reinstall windows

[utrop17]

well i spoke with the service tecnic because the mobo dont make default settings, when i try use the jumper have a error and start to give me a lot of time error 99 and dd.

so i will send it back for service x_X 

thanks for the answers guys

[utrop17]

guys i take the new mobo today, i put the cpu the pws and 2 rams just for test all is ok before put in the casse........ and guess what? code 13 and 76.... i speak with the support of asus they make me do a looooot of things for the end told me we need send it to a service tec x_X