Jump to content

Hello,

I've rebooted my PC and the next thing that happened was beeping followed by no display on my monitor, the rest of the computer clearly kept on booting as if it was a "no vga card installed" situation. 

 

I've done some manual reading for my "INTEL DZ77GA-70K" motherboard and found this out:

-The beep pattern meant "When no VGA option ROM is found"

-Debug LED (Eb) meant "Calling Video BIOS"

 

My GPU is a 7870 hawk which as a distinctive "reverse fan" on boot which is loud, now it doesn't make the sound but the 

leds on the card still light up.

 

I found out what is wrong but I cannot interpret the information above, can someone help me understand what this means?

I mean my PC was working 1 minute and a restart leads to this...

Link to comment
https://linustechtips.com/topic/54384-video-problem-no-display/
Share on other sites

Link to post
Share on other sites

And what if you take the GPU out and then boot it?

[CPU: AMD FX-6100 @3.3GHz ] [MoBo: Asrock 970 Extreme4] [GPU: Gigabyte 770 OC ] [RAM: 8GB] [sSD: 64gb for OS] [PSU: 550Watt Be Quiet!] [HDD: 1TB] [CPU cooler: Be Quiet! Shadow Rock Pro Sr1]  -Did i solve your question/problem? Please click 'Marked Solved'-

Link to comment
https://linustechtips.com/topic/54384-video-problem-no-display/#findComment-730507
Share on other sites

Link to post
Share on other sites

Try to reseat the gpu. Make sure all the power connections are snug. Could be a chance that your PSU is pooping out and doesn't have enough to power up your GPU.

X-10 - 7980XE - Gigabyte Aorous Gaming 9 - 128GB GSkill TridentZ RGB - SLI Asus GTX 1080 TI Strix
Easy Desk GuideMalware Removal Guide - New mobo, Same OS Guide

 

 

Link to comment
https://linustechtips.com/topic/54384-video-problem-no-display/#findComment-730514
Share on other sites

Link to post
Share on other sites

Try to boot with integrated graphics. If it shows up on the display, your GPU might have some problems.

CoolerMaster CM 690 II Basic | Intel i7-2600 | CoolerMaster Hyper 212+ 2x Zotac GTX 1070 AMP! Edition

Asus P8Z77-V LK | 2 x 4GB Kingston HyperX DDR3 1600MHz CL9 | SeaSonic M12ii 850W 80+ Bronze Crucial M4 128GB

 

Link to comment
https://linustechtips.com/topic/54384-video-problem-no-display/#findComment-730532
Share on other sites

Link to post
Share on other sites

wait.the leds stay like that all the time ? or just a sec?if so, that means that the card doesn`t have enough power to run.check the cables.

 

They stay on the whole time

 

EDIT:

Shutting down my PC for a while, then it boots again with display as if nothing happened. What on earth is going on?

Link to comment
https://linustechtips.com/topic/54384-video-problem-no-display/#findComment-730681
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×