New GTX 970 4GB problems

[moeblax]

Hey people, new guy here...

Today I bought an evga gtx970 ftw and installed it in my HPE-570T powred by a Cleveland-GL8 motherboard, 16gGB rams, corsair vs550.

I did install it properly and when I turn the PC on I did get output to the screen.

However, it stuck on the HP splash screen and after few minutes it beeps 3 times then goes into black screen and blinking cursor and nothing happens.

I tried sticking the hdmi in the integrated card, I got nothing.

I have the latest bios update (v7.15)

Please advise on the problem

[DaltonM]

Did you check your boot device? Sounds like there's nothing assigned to boot off of.

[RazrLeaf]

Try booting without the GPU installed, and your monitor plugged into the motherboard/CPU's integrated graphics, and if that works, repeat with the GPU installed (try various outputs from the GPU if it doesn't work at first, and make sure your monitor is expecting signal from the right place).

 

This assumes you have a boot device...

[moeblax]

Tried booting without card, it worked.

Tried booting from Integrated with gpu installed, black screen not even a splash screen.

I do have a boot drive, the pc runs smoothly on the HD5700.