Cooling plans

[dragonelf37]

Heya pps, 

 

My old AIO just broke down and i was thinking on getting a H110GTX from corsair.

I also just purchased a Corsair 750D case.

 

So in my hype i made a cooling plan just for the heck of it.

 

  The Orange arrows is the planned fan direction.

 

So will this help the cooling performance by much?

 

I was also looking into the DH-15 from noctua.

But not sure what the performance difference will be when used at its full potential

 

My actual build:

PSU: RM1000

CPU: i5 4690k

GPU: XFX 290x

MOBO: GB-D3H Z97

RAM: 16GB Mish mash of AData and kingston sticks ( replaced at next local sale )

Case: Corsair 750D

SSD: Samsung 240 Evo 250GB

HDD: 2x Barracude 1TB

 

[Juanse]

Seems fine

[Aruxx]

It probably will, I saw a video a while back of this dude putting a TON of fans on an AIO and it having some effect, but think about it in the long run.  You're gonna have to clean dust out of that, it's going to be noisier, and is it really worth it all?

 

Talking about all the exhaust fans out front.  You could probably get away with just a pull setup imo

[FatPenguin]

that fan next to the drive bay won't be able to do anything because its covered 

also nice diagram and welcome to the forums

[Toxicable]

snip

I think you need to remember that hot air rises, therefore with your proposed setup in opposing this principle 

[dragonelf37]

Thanks for the replies

 

@Aruxx: https://www.youtube.com/watch?v=VUbpb23yTK8

 

@FatPenguin: I would guess an all pull situation would be better.

 

@Toxicable: i know that but if there is enoth pressure it should be able to get it out of the case.

 

Its either this or mount it in the top. 

Would there be a big difference in performance?