H100i thermal compound?

[Bazingaman18]

Should I use the thermal compound that comes with a H100i or buy something like IC Diamond? If it is only a few decrease difference then I will just use the H100i compound. Any reply is mutely appreciated, thank you.

[Hirad123]

the stock one is fine

[skullbringer]

with arctic mx4 or any dedicated tim you can get up to 5 °C lowr temps

[SteepGnomeKing]

It will be a few degrees. I would just use what comes with the H100i

[OneGun]

I got about a 2 degree change from the stock to artic silver 5 on my H100i..And that's under full load..Just use the stock until you need to remove pump for do some reason..

[AraSarkisyan]

with arctic mx4 or any dedicated tim you can get up to 5 °C lowr temps

No you wont. Going from the worst to best TIM if properly applied there is only a 3c difference. The H100i's TIM is very well applied and is high end stuff. only about a 1-2c increase MAX. 

[skullbringer]

No you wont. Going from the worst to best TIM if properly applied there is only a 3c difference. The H100i's TIM is very well applied and is high end stuff. only about a 1-2c increase MAX. 

 

just telling my experience, dude. and if I say I got a 5°C difference with an 4.6GHz (1.3V) 3770k, thats it 

Noiseblocker eloop fans

[Bazingaman18]

Thank you guys for your response. I will be going with the stock H100i compound. Does anyone know how to put this post as answered?

[OneGun]

Thank you guys for your response. I will be going with the stock H100i compound. Does anyone know how to put this post as answered?

Just click on the best answer tab..Its been so long since i started a thread i think thats what you do.. 

[SKOONJar]

I have no complaints about the stock compound its generously preapplied and performs within a few degrees of leading compounds or paste.