issue with pump

[leo]

Ok so i just finished building my loop . But when the pump start it push à bit of water then stop pushing it . Any idea ?

[leo]

Ok so i just finished building my loop . But when the pump start it push à bit of water then stop pushing it . Any idea ?

[Levent]

lets loop this

http://linustechtips.com/main/topic/39188-issue-with-pump/

 

and answer is you might have air in your loop or your pump wont receive enough power

[mc141]

maybe a clog???

 

 

 

ps can a pump with a 3 pin conector ie ek pump from the 360l kit be safely hooked up to the cpu fan socket so the board can monitor the pump rpm and shut down it it fails??

[sabot]

You posted it twice. Just letting you know.

[WildTurtle]

you may have a big air bubble in your pump, shake the rig around to try to make the bubble loose.

[mc141]

You posted it twice. Just letting you know.

 he said lets loop this with a link to the other post.

[leo]

Ok got it to work ( plugged the pin in cpu header ) ... Im missing about 100ml liquid . Can i put anything else in it ?

[Jokrik]

what pump are you using?

[airdeano]

leo, that question is sooo vague..

 

a picture of the loop is deffo helpful.

 

you have a large air bubble upstream of the pump not allowing the water to pass

(air is compressible) if you have a rad in the roof, lightly open a connection to allow

air to escape.

 

but let's see what you have first to prescribe help for..

 

airdeano