Help Me

[Wolves5186]

I upgrade my 2gb 1333mhz to 4gb 1600mhz and now it wont boot to windows.My mobo is Asus P7H55-M.

[Ophidio]

Are you running one stick of 4GB ram or two 2GB sticks?

[Wolves5186]

Are you running one stick of 4GB ram or two 2GB sticks?

One stick 2gb upgrade to one stick 4gb

[Lolzious]

One stick 2gb upgrade to one stick 4gb

Did you make sure to ground yourself when handling the RAM or touching your motherboard?

[Wolves5186]

Yes i have.In bios it detect the stick but it wont start

[awesomes8wc3]

is there a bluescreen or what?

[Wolves5186]

is there a bluescreen or what?

After the bios it shows startup repair or starts normally.i choose startup repair and it blue screen.

[Fredrikmikael]

After the bios it shows startup repair or starts normally.i choose startup repair and it blue screen.

 

In the bios enable XMP, and or turn down the frequency of the ram to 1333MHz and try to boot.

 

Also please include

-CPU (overclocked?)

-Motherboard

[awesomes8wc3]

After the bios it shows startup repair or starts normally.i choose startup repair and it blue screen.

what does it say in these boxes?

[Wolves5186]

In the bios enable XMP, and or turn down the frequency of the ram to 1333MHz and try to boot.

Also please include

-CPU (overclocked?)

-Motherboard

Core i3 530 2.93ghz stock

Asus p7h55-m

[Wolves5186]

what does it say in these boxes?

I will update later,i'm reinstalling the 2gb ram because i have to use it for work.

[awesomes8wc3]

I will update later,i'm reinstalling the 2gb ram because i have to use it for work.

If you can get it to boot, chuck us the latest file in C:\Windows\Minidump.

It basically tells us what was most likely to have caused the crash.

[Wolves5186]

what does it say in these boxes?

After the 'A problem' paragraph it says IRQL_NOT_LESS_OR_EQUAL

TECHNICAL INFORMATION

***STOP:0X00000000A (0X00000000,0X000000002,0X000000001,0X85C71730)

sorry i dont know to attach picture i'm using my phone

[Wolves5186]

In the bios enable XMP, and or turn down the frequency of the ram to 1333MHz and try to boot.

Also please include

-CPU (overclocked?)

-Motherboard

Nope,did not work either

[awesomes8wc3]

After the 'A problem' paragraph it says IRQL_NOT_LESS_OR_EQUAL

TECHNICAL INFORMATION

***STOP:0X00000000A (0X00000000,0X000000002,0X000000001,0X85C71730)

sorry i dont know to attach picture i'm using my phone

that error happens when windows tries to access memory that it cant, could be caused by a bad driver or something.

can you get to safe mode? if you can, grab us the dump file and also what do you have installed on your computer?

[0x1e]

That's what's causing your system to crash - http://www.file.net/process/kbdhid.sys.html

The file is trying to be written to ram, but is having a problem. That's what's causing the crash.

 

Are you using two same sticks of ram? or miss-matched?

[Wolves5186]

That's what's causing your system to crash - http://www.file.net/process/kbdhid.sys.html

The file is trying to be written to ram, but is having a problem. That's what's causing the crash.

Are you using two same sticks of ram? or miss-matched?

I use one stick of ram

[0x1e]

I use one stick of ram

Ah ok,

So your old stick is gone?

 

Have you manually input your ram timings, speed and voltage? Are they all correct.

A single incorrect timing can cause a BSOD.

[Wolves5186]

Ah ok,

So your old stick is gone?

Have you manually input your ram timings, speed and voltage? Are they all correct.

A single incorrect timing can cause a BSOD.

Can you tell me the settings?

[Wolves5186]

that error happens when windows tries to access memory that it cant, could be caused by a bad driver or something.

can you get to safe mode? if you can, grab us the dump file and also what do you have installed on your computer?

No i cannot get it into safe mode and there is no file in minidump folder

[awesomes8wc3]

No i cannot get it into safe mode and there is no file in minidump folder

Although I doubt it, can you get to "Last Known Good Configuration"? (in the same menu as where safe mode and stuff is)

 

Download this http://www.memtest.org/download/5.01/memtest86+-5.01.usb.installer.zip and use the included tool to make a bootable flash drive

With the new memory installed run the tool for a few hours (and preferrably overnight), it'll check for bad memory.

[msj2410]

It simply may be that your cpu does not support 1600 mhz ram, look for it, maybe if you could overclock it.

[0x1e]

Can you tell me the settings?

You can look at the website that you bought it from and see if it has it.

Looking at the side of the ram will be easiest. It's normally on a sticker. It should say the speed, timing and volts. It will look something like 1600Mhz 9-9-9-24 1.5V (but not those settings exactly)