Jump to content

Random reboots, BSODs and other issues

jj9987

Well, I have quite a new build (parts varying from 4 months to few days old) and I am already suffering from issues.

 

At random moments, both displays (I have 2, both hooked up to GPU) just go black and Windows is booting up again.

In some cases, a BSOD also appears, as I can see from minidump files.

My Skype refuses to log in due to disk I/O error.

Also, not sure if related to this, my Chrome opens up the Chromium page every time I start Chrome.

 

I installed clean and legitimate Windows 8.1 Pro 64-bit on Tuesday, issues have occurred ever since.

List of BSODs that I have gotten so far - http://puu.sh/hXsz3/63bbe35d51.png

 

My PC specifications are:

Intel i7-4790k, not overclocked at this moment, cooled by Corsair H110i GT

MSI Z97 Gaming 7 motherboard

4x 4GB Crucial Ballistix Tactical 1600 MHz

Zotac GeForce GTX 970 4GB GDDR5

Samsung 850 PRO SSD 256GB, 2TB Seagate HDD

Corsair RM750 PSU

 

SSD SMART looks all OK. I will be running a memtest86 later today to check the RAM just in case. I ran "sfc /scannow", found some corrupt files, used "dism /online /cleanup-image /restorehealth" and it completed successfully. Problem still exists. I'm out of ideas at this moment.

HAL9000: AMD Ryzen 9 3900x | Noctua NH-D15 chromax.black | 32 GB Corsair Vengeance LPX DDR4 3200 MHz | Asus X570 Prime Pro | ASUS TUF 3080 Ti | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 6 TB WD RED | Corsair HX1000 | be quiet Pure Base 500DX | LG 34UM95 34" 3440x1440

Hydrogen server: Intel i3-10100 | Cryorig M9i | 64 GB Crucial Ballistix 3200MHz DDR4 | Gigabyte B560M-DS3H | 33 TB of storage | Fractal Design Define R5 | unRAID 6.9.2

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to comment
Share on other sites

Link to post
Share on other sites

Hmmm. If this is a new build check to see whether you have used all of the correct mobo standoffs, and you haven't got any where there are no screw holes which could be short circuiting the board. Also check for any overheating and make sure your H110i is seated properly.

If you want my attention, quote my post or I will not see it. I ignore builds that do not use PCPartPicker.

If I have solved/answered your question, please press "mark solved" to make it easier for the rest of the community find the answer

Link to comment
Share on other sites

Link to post
Share on other sites

CPU temps are fine, around 30-40 Celsius at idle, peaking about 50-60 when pushed harder.

 

I will check the standoffs shortly.

HAL9000: AMD Ryzen 9 3900x | Noctua NH-D15 chromax.black | 32 GB Corsair Vengeance LPX DDR4 3200 MHz | Asus X570 Prime Pro | ASUS TUF 3080 Ti | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 6 TB WD RED | Corsair HX1000 | be quiet Pure Base 500DX | LG 34UM95 34" 3440x1440

Hydrogen server: Intel i3-10100 | Cryorig M9i | 64 GB Crucial Ballistix 3200MHz DDR4 | Gigabyte B560M-DS3H | 33 TB of storage | Fractal Design Define R5 | unRAID 6.9.2

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to comment
Share on other sites

Link to post
Share on other sites

that looks like a memory issue to me.

 

on a less happy note: i had a system with the exact same list of BSOD reasons, and to this day i never figured out what exact component was broken...

but i'll take a bet on RAM here, because thats the one component i actually confirmed as broken on before mentioned system.

Link to comment
Share on other sites

Link to post
Share on other sites

Also, to add - Dropbox is unable to start due to permissions error. I can not push memtest86+ to my USB stick due to no access (using Rufus).

HAL9000: AMD Ryzen 9 3900x | Noctua NH-D15 chromax.black | 32 GB Corsair Vengeance LPX DDR4 3200 MHz | Asus X570 Prime Pro | ASUS TUF 3080 Ti | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 6 TB WD RED | Corsair HX1000 | be quiet Pure Base 500DX | LG 34UM95 34" 3440x1440

Hydrogen server: Intel i3-10100 | Cryorig M9i | 64 GB Crucial Ballistix 3200MHz DDR4 | Gigabyte B560M-DS3H | 33 TB of storage | Fractal Design Define R5 | unRAID 6.9.2

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to comment
Share on other sites

Link to post
Share on other sites

I let the memtest86 to run for 3 hours (after I managed to get it on the USB drive), however the layout was messed up and I could not read anything from there. http://puu.sh/hXEvc/e697768ebb.jpeg
 
I took the log file and put it here, as I see some MEM ERROR there. http://pastebin.com/3H3aCQb8
 
I managed to get Dropbox running by using these two commands:
icacls "%HOMEPATH%\Dropbox" /grant "%USERNAME%":(F) /T
icacls "%APPDATA%\Dropbox" /grant "%USERNAME%":(F) /T
 
Rest are still bugging.

HAL9000: AMD Ryzen 9 3900x | Noctua NH-D15 chromax.black | 32 GB Corsair Vengeance LPX DDR4 3200 MHz | Asus X570 Prime Pro | ASUS TUF 3080 Ti | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 6 TB WD RED | Corsair HX1000 | be quiet Pure Base 500DX | LG 34UM95 34" 3440x1440

Hydrogen server: Intel i3-10100 | Cryorig M9i | 64 GB Crucial Ballistix 3200MHz DDR4 | Gigabyte B560M-DS3H | 33 TB of storage | Fractal Design Define R5 | unRAID 6.9.2

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to comment
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...

I have reinstalled Ethernet drivers (for Qualcomm E220x) and graphics drivers.

It was stable for 2 days without no BSODs, but today, I have already gotten two.

 

PAGE_FAULT_IN_NONPAGED_AREA and IRQL_NOT_LESS_OR_EQUAL, both showing ntoskrnl.exe as the cause.

 

I'm getting a slight urge to change my motherboard.

HAL9000: AMD Ryzen 9 3900x | Noctua NH-D15 chromax.black | 32 GB Corsair Vengeance LPX DDR4 3200 MHz | Asus X570 Prime Pro | ASUS TUF 3080 Ti | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 6 TB WD RED | Corsair HX1000 | be quiet Pure Base 500DX | LG 34UM95 34" 3440x1440

Hydrogen server: Intel i3-10100 | Cryorig M9i | 64 GB Crucial Ballistix 3200MHz DDR4 | Gigabyte B560M-DS3H | 33 TB of storage | Fractal Design Define R5 | unRAID 6.9.2

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×