CPU slight bend?

[AukurgkNL]

When I wanted to install my i7 4790k I noticed that some pins where slightly bended. I took a picture and I want to know if it is a good looking socket or not.

I really want an answer ASAP. Thanks!

http://imgur.com/dhkVqyV

P.S. The bend was on the top left corner of the socket

[Giki]

 

When I wanted to install my i7 4790k I noticed that some pins where slightly bended. I took a picture and I want to know if it is a good looking socket or not.

I really want an answer ASAP. Thanks!

P.S. The bend was on the top left corner of the socket

 

 

Can we see the picture?

[Dimi3os]

If the pins are all bend in the same way and are parallel there is no problem.

The picture will bring clarity though. (You can use imgur if it's too big)

[AukurgkNL]

Can we see the picture?

Link to picture is added to my post. Image size was to much so had to upload it to imgur:)

[AukurgkNL]

If the pins are all bend in the same way and are parallel there is no problem.

The picture will bring clarity though. (You can use imgur if it's too big)

On the picture you can something black-ish pin at the top left corner. I don't know if it is a good socket though.

[NumLock21]

Can't tell by the pic taken if the pins on the socket is bent or not, looks okay to me.

[airdeano]

looks okie-dokie to me, install CPU and POST outside of the case.

[AukurgkNL]

looks okie-dokie to me, install CPU and POST outside of the case.

Can't tell by the pic taken if the pins on the socket is bent or not, looks okay to me.

Alright, I will try.

THANKS!

[MeltingPoint]

Looks all okay to me.