Jump to content

V Droop

Go to solution Solved by MG2R,

The CPUs and VRMs are designed to scale the voltage according to the requested clock speed, that's why it jumps from 0.978 to 1.220 whe put a load on it.

 

The fluctaution from 1.220 to 1.210 is most likely because the VRMs are never 100% perfect. The same applies to the voltages comming from a PSU, there is always a margin of error on them.

 

Vdroop is when you request 1.2V, but you only get 1.1V, for example. This is caused by internal losses inside the VRM.

Hello community,

 

I have recently gotten my 3570k to 4.7Ghz with 1.220v but bhen i stress test it it goes up from 0.978v at idle to 1.220v and fluctuates from 1.220v to 1.210v then back to 1.220v I had it at 4.4Ghz with 1.128v and there it also fluctuates from 1.128v to 1.120v then back to 1.128v then back to 1.120v.

 

My question is if you, the overclockers, would you consider this to be vdroop?

A water-cooled mid-tier gaming PC.

Link to comment
https://linustechtips.com/topic/35530-v-droop/
Share on other sites

Link to post
Share on other sites

It jumps up and down all the time, this is normal for what i've seen and heard.

Intel i7-2600K @ 4,5GHz | EVGA GeForce GTX 780 w/EKWB Copper Waterblock | Kingston HyperX blu 16GB @ 1600 MHz | Phanteks Enthoo Primo | MSI Z77A-GD65 | CM M1000 Silent Pro | Samsung 840 Pro 128GB | BenQ XL2420T 120hz | Logitech G710+ | Razer Deathadder 2013 -


- XSPC Raystorm CPU Waterblock | XSPC RX360 Radiator | EKWB EK-FC Titan GPU Waterblock -

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455064
Share on other sites

Link to post
Share on other sites

The CPUs and VRMs are designed to scale the voltage according to the requested clock speed, that's why it jumps from 0.978 to 1.220 whe put a load on it.

 

The fluctaution from 1.220 to 1.210 is most likely because the VRMs are never 100% perfect. The same applies to the voltages comming from a PSU, there is always a margin of error on them.

 

Vdroop is when you request 1.2V, but you only get 1.1V, for example. This is caused by internal losses inside the VRM.

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455200
Share on other sites

Link to post
Share on other sites

The CPUs and VRMs are designed to scale the voltage according to the requested clock speed, that's why it jumps from 0.978 to 1.220 whe put a load on it.

 

The fluctaution from 1.220 to 1.210 is most likely because the VRMs are never 100% perfect. The same applies to the voltages comming from a PSU, there is always a margin of error on them.

 

Vdroop is when you request 1.2V, but you only get 1.1V, for example. This is caused by internal losses inside the VRM.

Cool. At stock speeds it does that as well. I think i might get a better PSU. Thanks for the views expressed. 

A water-cooled mid-tier gaming PC.

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455282
Share on other sites

Link to post
Share on other sites

Cool. At stock speeds it does that as well. I think i might get a better PSU. Thanks for the views expressed. 

Vdroop and Vcore fluctuation has nothing to do with your PSU ;) It's all about the VRM

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455304
Share on other sites

Link to post
Share on other sites

Vdroop and Vcore fluctuation has nothing to do with your PSU ;) It's all about the VRM

So i should get a higher grade motherboard then? Mine is the lowest on the ASUS z77 range. P8z77 - v lx but i find it to be good maybe i won't IDK, it works so i will leave it.

A water-cooled mid-tier gaming PC.

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455672
Share on other sites

Link to post
Share on other sites

This happens to me when stress testing. But when playing games i dont get vdroop.

| CPU: INTEL i5 6600k @ 4.6Ghz @ 1.328v | Motherboard: ASUS Z170-AR | Ram: G.SKILL 2x8GB 2400Mhz | CPU Cooler : Corsair H100i V2

| GPU: GIGABYTE GTX980Ti G1 GAMING | SSD: SAMSUNG 840 EVO 250GB  Storage: WD 1TB GREEN | OS: Windows 10 Pro 64bit | PSU: FSP 650W AURUM S |

<<<<< BLK-Phant0m >>>>>

 

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455721
Share on other sites

Link to post
Share on other sites

So i should get a higher grade motherboard then? Mine is the lowest on the ASUS z77 range. P8z77 - v lx but i find it to be good maybe i won't IDK, it works so i will leave it.

From what you've posted, I can only conclude that you're not experiencing any Vdroop. Vcore fluctuation is normal and can not be avoided, at all. You can combat Vdroop by downloading the ASUS AI Suite. Going into the Digi+ VRM settings will alow you to set CPU Load-Line Calibration, this will adjust the Vcore voltage to take into account Vdroop.

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-455963
Share on other sites

Link to post
Share on other sites

From what you've posted, I can only conclude that you're not experiencing any Vdroop. Vcore fluctuation is normal and can not be avoided, at all. You can combat Vdroop by downloading the ASUS AI Suite. Going into the Digi+ VRM settings will alow you to set CPU Load-Line Calibration, this will adjust the Vcore voltage to take into account Vdroop.

Yes i know about that and i do use AI Suite II. I was just wondering if it happens to other people is all.

A water-cooled mid-tier gaming PC.

Link to comment
https://linustechtips.com/topic/35530-v-droop/#findComment-456090
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×