Jump to content

CPU fan error on boot up

archip
By archip
in Troubleshooting
 Share
Posted

Hi, so I have been using my new computer for about a week now and every time I boot, it says 7344348729.png so at this point I hit F1 and it brings me to the bios where I press F8 and go to the boot menu and select my drive and boot. I was wondering how to get rid of this CPU fan error. Thanks.

 

 

SPECS:

Intel I7 5820K

Asus X99 Deluxe

Ripjaws Series 4 16GB at 2133

EVGA GTX 960 SSC

Phanteks Enthoo Luxe

Enermax Liqtech 240

Corsair AX860

Samsung 850 EVO 500GB

Windows 8.1 Pro

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/
Share on other sites
Link to post
Share on other sites
Posted

What cpu cooler are you using?

I've built 3 PC's, but none for myself... In fact, I'm using an iMac that my dad bought for me as my desktop. Awkward...

Please don't say "SSD drive." By doing so, you are literally saying "Solid State Drive Drive" and causing my brain cells to commit suicide. The same applies to HDD (Hard Disk Drive) and PCIe (Peripheral Component Interconnect Express).

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4809791
Share on other sites
Link to post
Share on other sites
Posted

All you have to do is plug any fan/pump into the header, but I would recommend you plug your pump into it.

I've built 3 PC's, but none for myself... In fact, I'm using an iMac that my dad bought for me as my desktop. Awkward...

Please don't say "SSD drive." By doing so, you are literally saying "Solid State Drive Drive" and causing my brain cells to commit suicide. The same applies to HDD (Hard Disk Drive) and PCIe (Peripheral Component Interconnect Express).

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4810322
Share on other sites
Link to post
Share on other sites
Posted

Hi, so I have been using my new computer for about a week now and every time I boot, it says so at this point I hit F1 and it brings me to the bios where I press F8 and go to the boot menu and select my drive and boot. I was wondering how to get rid of this CPU fan error. Thanks.

 

 

SPECS:

Intel I7 5820K

Asus X99 Deluxe

Ripjaws Series 4 16GB at 2133

EVGA GTX 960 SSC

Phanteks Enthoo Luxe

Enermax Liqtech 240

Corsair AX860

Samsung 850 EVO 500GB

Windows 8.1 Pro

 

Hmmm on my Z97M OC Formula I haven't plug any fan at all and I don't get an error. Looks like Asus X99 Deluxe has an extra protection "feature". If you wan't to suppress the error connect the speed sense pin to +12V.

 

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4811309
Share on other sites
Link to post
Share on other sites
Posted

How does one do that?

 

I reread the specs of the 4 pin PWM controlled header. It's not possible to bridge it, since it's measured digital, sorry. There are solutions like using an NE555, but it's way to much work to fix this smal issue.

 

But can't you turn off the fan within the BIOS?

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4813089
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I reread the specs of the 4 pin PWM controlled header. It's not possible to bridge it, since it's measured digital, sorry. There are solutions like using an NE555, but it's way to much work to fix this smal issue.

 

But can't you turn off the fan within the BIOS?

Dumb question, wouldn't that cause the fans to not spin? Thanks

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4813896
Share on other sites
Link to post
Share on other sites
Posted

Dumb question, wouldn't that cause the fans to not spin? Thanks

Oh wait, you have a fan pluged in and you get the error?

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4813923
Share on other sites
Link to post
Share on other sites
Posted

Yes, I have my fan hub Running off of the cpu header. Sorry if that wasn't clear.

Oops my fault I guess...

Ok you get the error because your fans don't spinn up fast enough of the sense signal get's delayed by the fan header (unlikely).

 

- If you have a series restistor / low noise adapter remove it.

- If you can set the start up voltage or duration set it to max.

- Doeas the fan header have one specialized port of which the speed it read? If yes, plug the smalest fan in there.

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4814591
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I do have low noise adapters on my fans but I'm fine with removing them since I thought they were fan extention cables, lol. And I will also plug my smallest fan into the special header on the fan hub once I get home. Will tell you how it went once I'm done. Also I love your fanless pc.

Oops my fault I guess...

Ok you get the error because your fans don't spinn up fast enough of the sense signal get's delayed by the fan header (unlikely).

 

- If you have a series restistor / low noise adapter remove it.

- If you can set the start up voltage or duration set it to max.

- Doeas the fan header have one specialized port of which the speed it read? If yes, plug the smalest fan in there.

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4814727
Share on other sites
Link to post
Share on other sites
Posted

I do have low noise adapters on my fans but I'm fine with removing them since I thought they were fan extention cables, lol. And I will also plug my smallest fan into the special header on the fan hub once I get home. Will tell you how it went once I'm done. Also I love your fanless pc.

 

Thx, an other fanless build is under construction rigth now.

 

Only the fan which the speed is read must not have an low noise adapter the other once are fine.

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4814783
Share on other sites
Link to post
Share on other sites
Posted

I tried your idea, nothing I'm still getting the error.

Hmmmm.... whats the model number of your fan hub?

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4814995
Share on other sites
Link to post
Share on other sites
Posted

its the built in phanteks one.

 

To be honest I'm running out of ideas...... sorry :(

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4815043
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Hmmmm.... whats the model number of your fan hub?

It apears I have ran into another issue, so while my friend and I were trouble shooting we turned CPU fan speed to ignore, then none of the fans turned on so I rebooted and we changed it back to monitor rather than ignore but none of the fans turn on again!!!! Would you happen to know how to help on that front, and im still getting the error.

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4815048
Share on other sites
Link to post
Share on other sites
Posted

Can't you set a fan curve anymore?

Resetting BIOS will work, but that's a bad idea because you loose all your setting.

Mineral oil and 40 kg aluminium heat sinks are a perfect combination: 73 cores and a Titan X, Twenty Thousand Leagues Under the Oil

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4815066
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Can't you set a fan curve anymore?

Resetting BIOS will work, but that's a bad idea because you loose all your setting.

I havent over clocked yet and I think All I would have to restore would be which drive it boots to. do you think it would be worth it?

Link to comment
https://linustechtips.com/topic/353932-cpu-fan-error-on-boot-up/#findComment-4815073
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×