larger case for current build

[Dabombinable]

I've run into a sligtht problem with my current case not having enough room for all of my HDD and 2x 3.5" bays. Are there any cases with; mounts for 7x 3.5" HDD, 2x3.5" bays, 2x5.25" bays (3 preffered but not neccessary at this point) and mounts for 2x 120mm fans in the front to cool the HDD. I'd prefer the cheapest case possible that meets my requirements, but I'm not adverse to saving up for the more expensive ones.

[Samsterstorm]

Corsair 900D! You will never need another case again can fit anything

 

EDIT: Almost anything

[Prastupok]

Cooler Master Cosmos II

[Overkilled]

Caselabs sm8

[Samsterstorm]

Caselabs sm8

And also that!

[AJR]

Cooler Master Cosmos II

[VincentiusIV]

900D or Phanteks Enthoo Primo. I would go with the Primo, it's an awesome case ^^. Has 6x 3.5'' and 5x 5.25'' bays. The 3.5'' bays are cooled by 2 high quality 140mm fans. You can always add more 3.5'' bays in the left over 5.25'' bays

[Dabombinable]

Cooler Master Cosmos II

Apart from the single front fan, the Cosmos II seems a lot more realistic than the 900D. And I actually need 2x front 120mm fans as the HDD hit 50^oC+ without them.

Edit: Oh, now I see. Its got cooling for the bottom bays. Would it allow me to route IDE cables there?

[Dabombinable]

900D or Phanteks Enthoo Primo. I would go with the Primo, it's an awesome case ^^. Has 6x 3.5'' and 5x 5.25'' bays. The 3.5'' bays are cooled by 2 high quality 140mm fans. You can always add more 3.5'' bays in the left over 5.25'' bays

I've actually got 2x 5.25-3.5" adapters, so I could get away with 6 3.5" HDD bays and4-5 5.25" bays.

[ADZ_123_!"£]

Not a 100% sure if it would fit everything in but 99% sure it would the corsair 750d.

[Prastupok]

Apart from the single front fan, the Cosmos II seems a lot more realistic than the 900D. And I actually need 2x front 120mm fans as the HDD hit 50^oC+ without them.

Edit: Oh, now I see. Its got cooling for the bottom bays. Would it allow me to route IDE cables there?

 

If you've never seen it... there is enough room for any routing. Although the Enthoo primo is nice too. I have a system in that one too.

[Fruitloops]

900D you can fit 10 cats in it.

[VincentiusIV]

I've actually got 2x 5.25-3.5" adapters, so I could get away with 6 3.5" HDD bays and4-5 5.25" bays.

I can tell you from my own experience that this case is freaking awesome. Phanteks has thought so many things through, and there is so much flexibility with this case when it comes to modding. Not to mention the (imo) amazing exterior and build quality. For just around 200 bucks compared to the 900d´s 300$

[Dabombinable]

I can tell you from my own experience that this case is freaking awesome. Phanteks has thought so many things through, and there is so much flexibility with this case when it comes to modding. Not to mention the (imo) amazing exterior and build quality. For just around 200 bucks compared to the 900d´s 300$

The Primo is around $300 here, and the 900D is around $500, as is the Cosmos II. Is there anything around the $200 AUD mark? (cheaper=I can get it sooner and have money leftover for other parts)

[VincentiusIV]

The Primo is around $300 here, and the 900D is around $500, as is the Cosmos II. Is there anything around the $200 AUD mark? (cheaper=I can get it sooner and have money leftover for other parts)

Then you could go for the Phanteks Enthoo Pro/Luxe. Compared to the primo, it has 6x 3.5'' and 3x''5.25

[Trik'Stari]

Thermaltake Core X9. Cheaper than the others being recommended, and holds more rads.

[CatzRuleZWorld]

NCASE M1! You can fit 2 hard drives, 1 m.2, and 2 SSDs! (trolling...)

[Dabombinable]

Thermaltake Core X9. Cheaper than the others being recommended, and holds more rads.

Thanks, it looks really nice and is definitely a lot cheaper and would suit my needs perfectly. But I won't need rad support at all unless I decide to make a custom dual socket 370 loop (though that would be epic-Pentium 3 at ambient temps, with RAM liquid cooled so it can go above 143MHz stable).