What pump is this?

[Norman_the_Owl]

Can anyone definitively tell me if this is an MCP650 or MCP655?

Warning, large images

 

[TheKDub]

Looks like this one: http://www.swiftech.com/mcp655.aspx

[dadasmithywinkle]

Can anyone definitively tell me if this is an MCP650 or MCP655?

Warning, large images

 

Since it's black, it looks to be the 655. Does it have a red adjuistable nob on it?

[Norman_the_Owl]

Since it's black, it looks to be the 655. Does it have a red adjuistable nob on it?

It's hard to tell, there's no good angle.

[dadasmithywinkle]

It's hard to tell, there's no good angle.

I'd say it is but cant garuntee it

[DildorTheDecent]

Since it's black, it looks to be the 655. Does it have a red adjuistable nob on it?

Both wires are red and black. So it is a fixed speed pump. 

[dadasmithywinkle]

Both wires are red and black. So it is a fixed speed pump. 

Then it'd be the 650

[DildorTheDecent]

Then it'd be the 650

 

No red switch and the fact that the manual also says 650 would does make that true. 

 

If it was a PWM version it would have the additional yellow and blue wire. 

[dadasmithywinkle]

 

No red switch and the fact that the manual also says 650 would does make that true. 

lelelelel didnt even see that. Dildor the detective over here.

[DildorTheDecent]

lelelelel didnt even see that. Dildor the detective over here.

@Norman_the_Owl

 

your problem has been solved by the greatest duo of all time. 

[Norman_the_Owl]

 

No red switch and the fact that the manual also says 650 would does make that true. 

 

If it was a PWM version it would have the additional yellow and blue wire. 

 

The manual saying 650 is moot, EK made the mistake of shipping a bunch of 655's as 650's several times. That's the only reason i'm double checking.

Also see below for wires

Both wires are red and black. So it is a fixed speed pump. 

http://www.swiftech.com/mcp655.aspx

 

MCP655 doesn't nescessarily have 3 wires, it might have the switch on the back. It's too hard to tell.

[Norman_the_Owl]

Also, MCP655's are supposed to be blue...

[DildorTheDecent]

The manual saying 650 is moot, EK made the mistake of shipping a bunch of 655's as 650's several times. That's the only reason i'm double checking.

Also see below for wires

http://www.swiftech.com/mcp655.aspx

 

MCP655 doesn't nescessarily have 3 wires, it might have the switch on the back. It's too hard to tell.

The PWN one would have the extra wires you silly. 

 

Well the MCP655 has a little red knob while the MCP650 doesn't.

 

This is what the MCP655 looks like on Google images apparently. 

[Norman_the_Owl]

The PWN one would have the extra wires you silly. 

 

Well the MCP655 has a little red knob while the MCP650 doesn't.

 

This is what the MCP655 looks like on Google images apparently. 

 

 

Huh, what'd you say?

 

God this is so confusing. I'm pretty sure it's a 655 at this point but because the dent where the red dial is is obscured by the wire (what luck) it's too hard to tell

[DildorTheDecent]

Huh, what'd you say?

God this is so confusing. I'm pretty sure it's a 655 at this point but because the dent where the red dial is is obscured by the wire (what luck) it's too hard to tell

Appears that Swiftech wanted a change mid way through the pumps life cycle. 

 

Where you get the images btw?

[Norman_the_Owl]

Appears that Swiftech wanted a change mid way through the pumps life cycle. 

 

Where you get the images btw?

Which ones, the stock photos? Google images. I'll admit i cheated, the last one is a EK D5 vario, but it should be the same thing...Hopefully