PA doesn't post after new GPU? Help please

[Giganizer300PRO]

All my pc specs are in my signature.

At first I had a Sapphire 280 DUAL-X (or something) and my system ran just fine.

Then I installed a new CPU cooler and an additional fan and the new 970 and I ran the system. The fans and leds turned on for a second and third then everything died and after a few seconds the cycle repeated.

Then I plugged all of my case fans back to the fan controller like it was before and everything looked fine, but when I connected everything back, nothing worked. No screen output, no keyboard leds nothing. I have 2 CM fans on the CPU cooler. I unplugged the case fans but still no change.

What is wrong?

Help me please.

Is it the power supply not having enough juice to power my beast?

Thanks for your help a lot.

Sorry for mistakes I have a o write this on my phone.

EDIT: I shipped the card from US (NCIX) and shipped it to Europe when everything else is ordered from here. If there's a different standard or IDK...

[IMPERIUS]

Is the cpu cooler mounted properly? did you apply thermal paste to it?

And no, your psu is not a problem

Veseli me, da vidim Slovenca na tem forumu haha

[Giganizer300PRO]

Is the cpu cooler mounted properly? did you apply thermal paste to it?

And no, your psu is not a problem

Veseli me, da vidim Slovenca na tem forumu haha

I tightened the screws as much is I could (more or less) and yes I applied thermal paste, probably could have put less too.

Res je lepo videt Slovenca ja.

[IMPERIUS]

I tightened the screws as much is I could (more or less) and yes I applied thermal paste, probably could have put less too.

Res je lepo videt Slovenca ja.

 

Hmm this is above my knowledge

oprosti ampak ne spoznam se na take težave

[Giganizer300PRO]

Hmm this is above my knowledge

oprosti ampak ne spoznam se na take težave

OK sej je v redu mi bo že nekdo drug pomagal.