Gtx 970 Overclocked.

[Texhnlyze]

 

Is this enough for a GTX 970 G1 Gaming?

[Archangel1994]

Not loading for me

[virtualTune]

its alright yeah. 

[Texhnlyze]

its alright yeah. 

Should I push it more?

[Faceman]

Should I push it more?

Me personally, I like to push my GPU as high as it will go on stock voltage and leave it there.  Unless if you push the voltage a little bit to get more gains.  You will only know once you have experimented.  If you are unhappy with performance, and are ok with extra heat, by all means, push it higher.

 

For my GPU, the EVGA GTX 780 SC, I am able to get a nice +100Mhz on the Core and +250Mhz on the memory without extra voltage.  It takes my card an extra 32mV just to get an additional 25Mhz on the core.  You won't know what your card is like until you get in there and run some tests.  Who knows, your card could open up to new heights once you add extra voltage.

[virtualTune]

Me personally, I like to push my GPU as high as it will go on stock voltage and leave it there.  Unless if you push the voltage a little bit to get more gains.  You will only know once you have experimented.  If you are unhappy with performance, and are ok with extra heat, by all means, push it higher.

 

For my GPU, the EVGA GTX 780 SC, I am able to get a nice +100Mhz on the Core and +250Mhz on the memory without extra voltage.  It takes my card an extra 32mV just to get an additional 25Mhz on the core.  You won't know what your card is like until you get in there and run some tests.  Who knows, your card could open up to new heights once you add extra voltage.

my GHz edition won't even do +1 on the memory. It is such a disappointment.

 

@Texhnlyze what are your temps?

[Texhnlyze]

63c 

 

my GHz edition won't even do +1 on the memory. It is such a disappointment.

 

@Texhnlyze what are your temps?

65c  when running furmark

45c when running normal games

 

Haven't tried 3dfiremark yet.

[virtualTune]

63c 

 

65c  when running furmark

45c when running normal games

 

Haven't tried 3dfiremark yet.

that is sick well if it were me, I would crank the voltage and try to get as high as possible, but that's just me

[Texhnlyze]

that is sick well if it were me, I would crank the voltage and try to get as high as possible, but that's just me

Shoud I try cranking my gpu with 32vm?

[virtualTune]

Shoud I try cranking my gpu with 32vm?

Guru3D got their sample to 1509MHz, but that was at +87mV. the average gain is going to be less than 1fps unless you card turns out to be really good and you can OC to 1600MHz. try +32mV and see how far you get.