Jump to content

H60 issue

mralexkohl1993
By mralexkohl1993
in Troubleshooting
 Share
Posted

I have always had a great success rate with corsair products but now I'm confused. Last night i did a build with a H60 and a NF-F12 as the fan and when I ititally booted up the system I had a weird whine from the cpu block I tapped it and it went away. Everything seemed okay until I opened up real temp to check my temps. Idle was 50-60 sometimes it drops to 40 but under regular use like browsing the Internet its between 50-60 and full load with small fft on prime95 yeilded 90+ degrees in less then 5 mins so I cut the test. I don't know what my problem is I feel like it has a faulty pump. Any input would be great

The bottom rad is for the GPU top rad is for the CPU in the picture.

post-833-0-88145400-1415214698_thumb.jpg

Link to comment
https://linustechtips.com/topic/245239-h60-issue/
Share on other sites
Link to post
Share on other sites
Posted

There is no picture but you could always RMA it. First make sure the block is actually seated correctly and if the problem remains then RMA.

DESKTOP - Motherboard - Gigabyte GA-Z77X-D3H Processor - Intel Core i5-2500K @ Stock 1.135v Cooling - Cooler Master Hyper TX3 RAM - Kingston Hyper-X Fury White 4x4GB DDR3-1866 Graphics Card - MSI GeForce GTX 780 Lightning PSU - Seasonic M12II EVO Edition 850w  HDD -  WD Caviar  Blue 500GB (Boot Drive)  /  WD Scorpio Black 750GB (Games Storage) / WD Green 2TB (Main Storage) Case - Cooler Master 335U Elite OS - Microsoft Windows 7 Ultimate

Link to comment
https://linustechtips.com/topic/245239-h60-issue/#findComment-3366374
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×