Full load temps 4790k

[Fata1000]

Hi! I think i have the temps a little high it might be that i need to cleaan a bit the cooler but here are my temps on full load and a slight oc (my first cpu oc) 
Ahh the cooler is a noctua noctua nh-d14

[AlwaysFSX]

That's toasty. Can you drop the voltage down or is it unstable?

[Fata1000]

That's toasty. Can you drop the voltage down or is it unstable?

I left it on auto cause it was the first time i wasn't sure about changing it

for now ill leave it on turbo boost and then ill try again 

[Fata1000]

here are the auto tuning temps

[Shaqo_Wyn]

Aw sh*t, we got a workstation ova here. Nice cooler. Definitely try to back down the voltage or the OC. Anything about 75 degrees makes me uncomfortable.

[AlwaysFSX]

here are the auto tuning temps

200MHz down but those temps are much better. Stress that for a few hours and see if it's stable. Then slowly work back up to 4.7GHz at that voltage. Try not to go above ~1.2V for the temps.

[Fata1000]

Aw sh*t, we got a workstation ova here. Nice cooler. Definitely try to back down the voltage or the OC. Anything about 75 degrees makes me uncomfortable.

yeahh its a Workstation/Gaming Rig I managed to use the quadro k600 for rhino and solidworks while the gtx 770 is running the games pretty well till now no issues with drivers, although the difference in between them is not huge the quaddro outperforms the gtx770 in opengl viewports with settings at "workstation dynamic streaming"

[Fata1000]

200MHz down but those temps are much better. Stress that for a few hours and see if it's stable. Then slowly work back up to 4.7GHz at that voltage. Try not to go above ~1.2V for the temps.

Thanks for the replies i will try to do it