fan setup

[shawno]

As you can see with the pic, my fans push the cases air through the rads to outside the case. I currently have the rear 140 to intake air into the case.

My Question is, should I switch the fans upside down to pull fresh air into the Rads and use the rear 140 as an exhaust?

Kinda disappointed I liked the blue rings on the visable part, but if it means better cooling, it'd be worth it.

Reason I ask is because I turned fan speed down to 1000 rpm and it crept up to 50 degrees for the gpus and cpu.

[ForsakenLive]

you should use the 2 fans on the front as intake, not exhaust.

[shawno]

At the moment the front fans do exhaust case air through the front radiator. Do you think both Rads should be pulling in fresh air or continue pushing case air out?

[shawno]

They're 290x's. Small because it's a big case lol

[Tea1337]

The top rad should be exhaust, the front rad should be intake.

[Faceman]

Front radiator should be intake, the top radiator should be exhaust, along with the 140mm rear fan, keep that exhaust.  Air should flow from the front of your case out the back of your case.

[shawno]

Legends I'll do this tonight.

Thanks heaps guys

[shawno]

Guys, you're all amazing. Temps dropped 10 degrees on heaven bench!

And because I only did the front radiator I didn't have to screw around with the top rad.

Thanks gentlemen!!!