NZXT h440 razer

[Candelstick]

im thinking on getting the razer h440 case but not sure what rads to get I know it supports a 360mm on top but I wanna put another in also not sure who to go with for liquid cooling parts some advice would be really nice

 

[GhostWindGamer]

@_TechPuppet_ can probably help you

[_TechPuppet_]

im thinking on getting the razer h440 case but not sure what rads to get I know it supports a 360mm on top but I wanna put another in also not sure who to go with for liquid cooling parts some advice would be really nice

 

You can stick two 360 EK PE Rads in the h440. I recommend going with the EK PE Rads because they are squared/flat at the bottom where the 1/4 inch threads are, and you are able to fit both in with no problem. I've tried many different configurations with a couple of Alphacool Slim Profile Rads as well but because the bottom where the 1/4 inch threads are protrudes out too far it makes it impossible for two 360 Rads to fit.

 

@_TechPuppet_ can probably help you

 

Thanks for the recommendation

I help when I can.

[GhostWindGamer]

You can stick two 360 EK PE Rads in the h440. I recommend going with the EK PE Rads because they are squared/flat at the bottom where the 1/4 inch threads are, and you are able to fit both in with no problem. I've tried many different configurations with a couple of Alphacool Slim Profile Rads as well but because the bottom where the 1/4 inch threads are protrudes out too far it makes it impossible for two 360 Rads to fit.

 

 

Thanks for the recommendation

I help when I can.

I figured you would be one of the best people to help because of the riddler which I am following and looking forward to the finished product it looks amazing

[_TechPuppet_]

I figured you would be one of the best people to help because of the riddler which I am following and looking forward to the finished product it looks amazing

Well thank you, I appreciate that. Glad to know you've subscribed and I hope to start putting it together soon.

Not too long from now, I think by the beginning of next month I'll be starting on it. Still a bit to go though, last of the parts to get, modding, and paint job.

Because I am moving to another state right now it's prolonging it a few weeks. Though once settled in we'll be seeing a lot more progress.

[GhostWindGamer]

Well thank you, I appreciate that. Glad to know you've subscribed and I hope to start putting it together soon.

Not too long from now, I think by the beginning of next month I'll be starting on it. Still a bit to go though, last of the parts to get, modding, and paint job.

Because I am moving to another state right now it's prolonging it a few weeks. Though once settled in we'll be seeing a lot more progress.

Ok well know that I'm really looking forward to the progress to come and good luck with your move

[Lays]

@airdeano has tried this, depending on thickness, you may have issues getting to the fittings depending on how you orientate them.

[airdeano]

thanks @Lays

 

even with the EX360 from XSPC was a nightmare. that forward corner gets really

cramped and busy. yes, using Alphacool rads because of the bung arrangements

eats into chassis or fouls the mounting. the area under the I/O and power switch

will need relocation or modification to keep from pinching the harness.