2500kOC help

[Ddm5]

Cine will load every thread. Yeah I see 4.9 in your future, but it all depends on what you're comfortable with.

 

 

lol you thread jacker B)

I know, I feel bad for hijacking this guys thread to be honest, but oh well, is there any point in investing in some decent thermal paste to drop a few 'c?

[Sm0k3]

Thanks for all the advise guys, will try it out.

[Wats]

I know, I feel bad for hijacking this guys thread to be honest, but oh well, is there any point in investing in some decent thermal paste to drop a few 'c?

It's more how you apply the paste, not what the paste is made of.

 

Thinnest layer possible and your cpu/cooler should be perfectly flat. Scratches are ok...that's why we use paste :P

 

 

 

Thanks for all the advise guys, will try it out.

Have fun!

[Godlygamer23]

Thanks for all the advise guys, will try it out.

You're welcome. Be sure to post your results here, and post any issues that come up along the way so we can be of assistance.

[Sm0k3]

You're welcome. Be sure to post your results here, and post any issues that come up along the way so we can be of assistance.

Alright, sounds good. Thanks

[Ddm5]

It's more how you apply the paste, not what the paste is made of.

 

Thinnest layer possible and your cpu/cooler should be perfectly flat. Scratches are ok...that's why we use paste :P

 

 

 

Have fun!

Hmmm, we'll see then.

[Sm0k3]

 should i disable turbo boost or should i do the OC in the turbo mode? An the c states, should they stay on auto?

[Godlygamer23]

What motherboard do you have? I apologize for the delay. I didn't see this post in my notifications for 3 hours.

[Sm0k3]

I was away for a bit, not your fault, the z77x-ud5h by gigabyte

[Godlygamer23]

<p>There should be an area for the straight multiplier. I would disable turbo boost. Also, did you disable any power saving options? It may increase stability by disabling them.</p>

[Sm0k3]

So i disabled c1e, c3/c6 state and EIST function. Is that alright.

[Godlygamer23]

So i disabled c1e, c3/c6 state and EIST function. Is that alright.

Yup.

[Sm0k3]

Alrighty, i will let you know how things went.

[Godlygamer23]

Alrighty, i will let you know how things went.

Okay. Great.

[Sm0k3]

i put in the bios 1.280 volts on the cpu and in windows it says under p95 load its at 1.236v. I had the LLC at medium. Any thoughts?

[Godlygamer23]

i put in the bios 1.280 volts on the cpu and in windows it says under p95 load its at 1.236v. I had the LLC at medium. Any thoughts?

You probably don't need that high of voltage anyways(1.280 value), but how about trying to get LLC at its maximum?

[Sm0k3]

Perfect thanks.

[Godlygamer23]

Perfect thanks.

You're welcome.

[Sm0k3]

So i got to 4.3 GHZ at a core voltage of 1.272v. I might keep going higher in a while but for now im gonna run this for 24 hours and test how it runs.

[Godlygamer23]

So i got to 4.3 GHZ at a core voltage of 1.272v. I might keep going higher in a while but for now im gonna run this for 24 hours and test how it runs.

Okay. Great. What are your P95 temps so far? Also, try to lower your voltage. I'm running at 4.3GHz now and my voltage is sitting at 1.21 to 1.22. Unless your system becomes unstable at that voltage.

[Sm0k3]

Max is 65, lowest is 61, its kinda hot in my room right now but it looks good so far.

[Godlygamer23]

Max is 65, lowest is 61, its kinda hot in my room right now but it looks good so far.

Not bad. Especially for a hot room. What are your fan RPMs? Oh and, what's your cooler?

[Sm0k3]

I have crappy fans right now, the highest rpm that they can go is 800rpm, so thats what they are running at. And I have a h100i

[Godlygamer23]

I have crappy fans right now, the highest rpm that they can go is 800rpm, so thats what they are running at. And I have a h100i

Are you gonna be replacing those fans at all?

[Sm0k3]

Oh yeah, either bit phenix spectre pros or corsair sp silents.