Sli Water cooling

[ducttape815]

I am doing a custom water loop and have sli 780 ti's.

http://www.frozencpu.com/products/23687/ex-blc-1696/EK_GeForce_780_GTX_Ti_DCII_VGA_Liquid_Cooling_Block_-_Acetal_Nickel_EK-FC780_GTX_Ti_DCII_-_AcetalNickel.html

this is the water block i am using on both cards. What is the best way to connect the 2 sli cards without using tubing.

thanks

[Enderman]

telescoping fittings or a solid SLI watercooling bridge

[airdeano]

depends on what motherboard PCIe spacing you have. standard 3-slot  is widely

used so as suggested previous, or what ever ek has to complete the block install.

[xToFxREAPER]

Get an Ek Fc Terminal with the appropriate spacing for your motherboard, i personally prefer the parallel terminals because the gpu temps are equalized however they are available as a serial link as well

[xToFxREAPER]

Im going to assume your using z87/z97 mobo heres what i would get 

 

http://www.frozencpu.com/products/19897/ex-blc-1450/EK_Terminal_Block_-_Dual_Parallel_3-Slot_-_Black_Acetal_EK-FC_Terminal_DUAL_Parallel_3-Slot.html

[xloexs]

Bitspower Adjustable Aqua Link Pipe I for 2 slot

Bitspower Adjustable Aqua Link Pipe II for 3 slot (i think)

[Shaqo_Wyn]

I am doing a custom water loop and have sli 780 ti's.

http://www.frozencpu.com/products/23687/ex-blc-1696/EK_GeForce_780_GTX_Ti_DCII_VGA_Liquid_Cooling_Block_-_Acetal_Nickel_EK-FC780_GTX_Ti_DCII_-_AcetalNickel.html

this is the water block i am using on both cards. What is the best way to connect the 2 sli cards without using tubing.

thanks

One of these, parallel or serial, doesn't matter which because the difference in performance is negligible. 

 

#1: http://www.frozencpu.com/products/19897/ex-blc-1450/EK_Terminal_Block_-_Dual_Parallel_3-Slot_-_Black_Acetal_EK-FC_Terminal_DUAL_Parallel_3-Slot.html#blank

 

#2: http://www.frozencpu.com/products/16400/ex-tub-1318/Bitspower_Adjustable_Aqua_Link_Pipe_II_41-69mm_-_Black_Sparkle_BP-BSDG14AALPII.html