HELP ME PLEASE PC BLACKSCREEN

[bry.yyyy]

hi guys i just removing my pc to my room after i plug all in i power on the pc but the screen goes blank only black screen Cannot Enter BIOS

Can I Get Any Solution Because My All Data On My PC Is very important for me

thanks if you helping 

 

[Guest]

Make sure all the cables are correctly plugged in

Check all the cables inside the PC too.

[bry.yyyy]

i already check all the cable nothing wrong the monitor is on but screen still black any solution for this 

[kristaps552]

Check that you have plugged the cable from the monitor into the correct slot, meaning, not in the motherboard but in the graphics card.

[bry.yyyy]

yes i already right but still black screen 

i don't know what is happening to my pc i already try remove and install RAM Again and still not going 

[lx_srs]

yes i already right but still black screen 

i don't know what is happening to my pc i already try remove and install RAM Again and still not going

Did you bump your PC in any way when trying to move it? If so, have you checked that all components are firmly in place?  When removing and installing the RAM, did you take proper electrostatic precautions?

[bry.yyyy]

i already checked all place properly 

i don't know why this is happening i can't enter BIOS To The Screen Only Black

[bry.yyyy]

help me please guys

[SLPNTIM]

Try unplugging the power supply and then pressing the power button and holding it for about a minute. Then see if that works

[Catmanistheman]

Have you tried it with a different cable?

A different monitor?

[bry.yyyy]

you mean the power supply or the power supply cable ??
 

[SLPNTIM]

Power supply cable

[bry.yyyy]

still nothing just black screen

[dragoon20005]

i suggest taking apart everything and out from the casing

 

 

and with only the CPU and RAM installed with power supply connected try to boot to BIOS

[OriginalPromise]

If you can not access the BIOS and if you didn't touch any of the internal components while transporting the desktop, it's likely you sent shocks to the HDD while transporting it. HDDs are fragile, and even the slightest physical contact can ruin the HDD. Make sure all internal components are connected inside the computer. If your problem still din't face solution, try reassembling the computer. The next step would be trying to swap out the HDD with another and see if it boots. If you still hit the bottom line, either your motherboard is malfunctioning, or you've damaged your pc with static electricity. If you've ended this far, you have to research into buying a new PC.

Now you mentioned your data being important. If you think your HDD's fine, try plugging your HDD into another pc (with precaution) and see if your HDD is alive. If it's dead and the data is sincerly important like some legal documents or the last remaining pictires of your dog or etc, send it to a lab; although from my judgement, it seems like the "valuable" data is something that can be redownloaded in your case.

I hoped this helped, good luck.

[bry.yyyy]

thanks for helping maybe i will try removing anything from cases because i already try other monitor and same 

Thanks For Helping Me Guys God Bless You

[bry.yyyy]

Guys after i open i try remove hdd still black 

the motherboard is alive i see the green light on the main board I think the problem in GPU Or Processor Or RAM 

i will insert a pic of my pc

[jojocool111]

try flashing your cmos by touching the connector on the mobo refer to the manual for this 

this resets all of the BIOS settings on ur pc and it might work after doing so 

if it doesnt you might have shorted out your ram or your GPU.

Hope u get it running 

Jo

[bry.yyyy]

hi guys this is the link on my all parts on pc when turn on  idk this help or not

https://mega.co.nz/#!KA5hUIQQ!1bN5lNZla_cAz52KOSqgIN0f6W4VKLrZxCzyR9wY_QQ

[bry.yyyy]

now my pc cannot power on after reset CMOS

Please help

[scaryjam823]

If you can not access the BIOS and if you didn't touch any of the internal components while transporting the desktop, it's likely you sent shocks to the HDD while transporting it. HDDs are fragile, and even the slightest physical contact can ruin the HDD. Make sure all internal components are connected inside the computer. If your problem still din't face solution, try reassembling the computer. The next step would be trying to swap out the HDD with another and see if it boots. If you still hit the bottom line, either your motherboard is malfunctioning, or you've damaged your pc with static electricity. If you've ended this far, you have to research into buying a new PC.

Now you mentioned your data being important. If you think your HDD's fine, try plugging your HDD into another pc (with precaution) and see if your HDD is alive. If it's dead and the data is sincerly important like some legal documents or the last remaining pictires of your dog or etc, send it to a lab; although from my judgement, it seems like the "valuable" data is something that can be redownloaded in your case.

I hoped this helped, good luck.

Hdds are not that fragile, the worst damage that can be done is when the drive is running, then it is bumped. If the drive is unpowered and it moves around there is hardly any room for concern. I've had drives for 5 years that have been thrown around, dropped etc. Guess what? They still work, because the platters weren't moving while the head tried to write data it didn't scratch any of them. Not to mention even if his hdd was bad that would NOT cause his computer to not even turn on, worst it would do is not allow him to boot. You have no idea what you're talking about.

[bry.yyyy]

i think i damage my motherboard After CMOS Reset PC Wont Power On

[bry.yyyy]

after resetting jumper The PC Won't Turn On

[bry.yyyy]

and now my pc already can start BUT Still BLACK SCREEN I AM VERY VERY VERY SORRY FOR EVERYONE THAT ANGRY WITH ME BECAUSE I TOO MANY ASKING

but can you all pro can still help me PLEASE ????

[SLPNTIM]

Do you have on board graphics. If so try plugging the monitor there. If it boots the graphics card is the issue. Now make sure the the graphics cards is in the right place and fully inserted that you can't just accidentally take it off. Also check to make sure the GPU cable is not damaged if it is usually if you wiggle it it would work. Also describe what happens exactly after you press the power button. Also it might just be that if you took off the CPU it isn't seated correctly