How Do You Actually Install LED Strips?

[Woody]

So in my new 750D, I have white led strips just to show off the inside. Problem is, they always keep falling off from the top. I tried using double sided velcro but even that didn't stick enough. The led strips never want to stick either. How can I actually stick these damn guys to the top and sides without them peeling themselves off... is there a product that is recommended? These are just strips I got from my work at Micro Center.

[LawrenceBarnes2013]

huuum, Superglu ?!!

[TheDigitalRealm]

Bitfenix Alchemy LED strips are pretty much the only LED strips I'd recommend. It's taken just under a year for the sticky side of these to start wearing off, and they're still not falling off!  

[Jonny.Wong.16]

I use 3M poster mounts (pretty much double sided sticky foam). It's been years and my LEDs / SSDs haven't moved. They also have the benefit of not leaving residue when you remove them.

[W-L]

Use 3M exterior mounting tape works really well: http://www.3m.com/product/information/Scotch-Indoor-Outdoor-Mounting-Tape.html

[`br4dz-]

I concur with 3M mounting tape. Use it for all of my LED mounting, be it home accent lighting, computer lighting, etc.

[euniqe]

I would use superglue, but then you have to consider being able to take them out.

[thunderdog512]

This is what I have in my 750D and haven't had an issue in 6 months. http://www.newegg.com/Product/Product.aspx?Item=N82E16812170032 They aren't super bright but give a nice glow.

[Bansh33]

Never really thought about 3m mount tape. Thanks for the idea!

[Syntaxvgm]

I use mounting tape. 3M namely. 

[VirtualNinja]

Hot glue works brilliantly, the 3m backing on the strips I get usually gives out after 12 or so months.

[ttam]

I normally take a hot glue gun and "tack" it on. Just enough to where I can pull it off but it'll stay put

[Socratic]

I have double sided paper tape and double sided foam. The paper tape is awesome, you stick it on and peel the paper off and you're left with the glue.