need help optimizing my ram

[dreamcast4599]

so im looking for some help tinkering with my ram to get the most out of it. i know i can just enable EXPO and call it a day but id like to tweak it a little bit below are my system specs 

 

 

 

 

 

specs below
cpu: 7800X3D
cpu cooler: cooler master ML360R 360mm aio with MX-4 TIM
gpu: 6700xt sapphire pulse
ram: 2x32gig ddr5 6000 F5-6000J3238G32GX2-RS5K
mobo: asrock taichi lite B650E
psu: seasonic gold rated 1000 watt bought in 2021 so i have to assume its not an ATX 3.0 rated psu
case: phanteks enthoo primo
ssd: 1tb sabrent rocket pcie 4.0
monitor asus tuf gaming vg279q1r 1080p 144Hz ips

[RONOTHAN##]

 

[dreamcast4599]

@RONOTHAN## how do i know what my ram die is? not sure i have hynix dies

 

[RONOTHAN##]

6 minutes ago, dreamcast4599 said:

@RONOTHAN## how do i know what my ram die is? not sure i have hynix dies

 

The speed bin you have (6000 CL32) is always some sort of Hynix die. In my experience it's usually 16Gb M die, and with AM5 you will want to raise the tRFC slightly (do 600 instead of the recommended 500). 

[dreamcast4599]

@RONOTHAN## ty i will try it

[dreamcast4599]

3 minutes ago, RONOTHAN## said:

The speed bin you have (6000 CL32) is always some sort of Hynix die. In my experience it's usually 16Gb M die, and with AM5 you will want to raise the tRFC slightly (do 600 instead of the recommended 500). 

what program should i use to see if my memory settings are stable?

 

[Apemanonline]

memtest from live usb key google it if ya get stuck i can run ya though. Its easy i worked it out.

[dreamcast4599]

@Apemanonline i have used memtest before so i should be ok ty for the help

[RONOTHAN##]

22 minutes ago, dreamcast4599 said:

what program should i use to see if my memory settings are stable?

 

I'd use TestMem5 with the 1usmus_v3 preset modified to run for a few hours to stress test. MemTest86 like was recommended above doesn't have a good reputation at finding memory errors related to overclocking. 

 

It is recommended to run a few memory stress tests though, not just one. 

[Apemanonline]

4 minutes ago, RONOTHAN## said:

I'd use TestMem5 with the 1usmus_v3 preset modified to run for a few hours to stress test. MemTest86 like was recommended above doesn't have a good reputation at finding memory errors related to overclocking. 

 

It is recommended to run a few memory stress tests though, not just one.

Good to know ill go look im new to this to hence the tag.

[RONOTHAN##]

2 minutes ago, Apemanonline said:

Good to know ill go look im new to this to hence the tag.

It definitely doesn't hurt to run, but I've personally never seen it pick up on errors unless other stress tests are finding a ton of errors. I still do keep a USB of it around though, it's very covenient for more homelab works

[dreamcast4599]

@RONOTHAN## where can i download the 1usmus config cant find it anywhere

 

[dreamcast4599]

nvm i found it

[RONOTHAN##]

16 minutes ago, dreamcast4599 said:

@RONOTHAN## where can i download the 1usmus config cant find it anywhere

 

Modify the 13th line (or the one that says "Cycles=3") to a higher number of cycles, something like 30. 3 loops usually isn't enough to find errors. 

[dreamcast4599]

@RONOTHAN## can i test it in windows or do i need a live usb?

[RONOTHAN##]

Just now, dreamcast4599 said:

@RONOTHAN## can i test it in windows or do i need a live usb?

TestMem5 runs inside Windows

[dreamcast4599]

@RONOTHAN## awesome got any other recommendations before i hop into my bios to adjust my settings?

[RONOTHAN##]

17 minutes ago, dreamcast4599 said:

@RONOTHAN## awesome got any other recommendations before i hop into my bios to adjust my settings?

Not really, there's not much more past that tutorial other than how to use TestMem5 and you might need to set TRFC to 600 rather than 500 like recommended. 

[KidKid]

17 hours ago, dreamcast4599 said:

so im looking for some help tinkering with my ram to get the most out of it. i know i can just enable EXPO and call it a day but id like to tweak it a little bit below are my system specs 

 

 

 

 

 

specs below
cpu: 7800X3D
cpu cooler: cooler master ML360R 360mm aio with MX-4 TIM
gpu: 6700xt sapphire pulse
ram: 2x32gig ddr5 6000 F5-6000J3238G32GX2-RS5K
mobo: asrock taichi lite B650E
psu: seasonic gold rated 1000 watt bought in 2021 so i have to assume its not an ATX 3.0 rated psu
case: phanteks enthoo primo
ssd: 1tb sabrent rocket pcie 4.0
monitor asus tuf gaming vg279q1r 1080p 144Hz ips

The main performance increase will come from tightening the timings, and also increasing RAM speeds.

[dreamcast4599]

@KidKid 6000 is the sweet spot for the 78000X3D so i just need ot tighten my timings