TrueNAS Scale change default network interface

[DrMiep]

Hey I just finished installing the newest TrueNas Scale Version (24.10.2) on a new bare metal Server.

My server has the mainboard integrated 1G NIC and a 10G network card installed. I configured it using the internal NIC because I didnt know if the 10G card would work without extra drivers.

I now plugged in the Cable to the 10G card and restarted. I assigned a static IP to the 10G interface beforehand so I dont have any problems with reaching the webUI but I was greeted by a critical error stating  "Failed to configure docker for Applications: Default interface 'enp10s0' is not in active state" (enp10s0 is the onboard 1G NIC).

Is there any known way to change the default interface from my 1G NIC to the 10G NIC? I've been searching the Truenas Forum and Guides but couldn't find anything

Both UI and CLI solutions are welcome

 

Thanks you for the help in advance

[OhioYJ]

29 minutes ago, DrMiep said:

Is there any known way to change the default interface from my 1G NIC to the 10G NIC?

Is this a supported 10G card?  (What is it?)

[DrMiep]

Hi, sorry for answering this late I had some private stuff. It' a Intel X540-T1 and should be supported as far as I know as Intel NICs in general should be supported