Jump to content

How to check if my 6+2pin connector is working in my half modular PSU

Brimstone
Go to solution Solved by SpookyCitrus,
8 minutes ago, Brimstone said:

I have a multimeter and i want to test it with it but idk how

On the 8 pin PCIE cable(6+2 pin) it should be yellow for positive and black for ground. Using a multimeter if it's working right you should see 12v.

https://help.corsair.com/hc/en-us/articles/17759727689997-PSU-CORSAIR-PSU-Pinout-Diagram

Posted (edited)

I have a 750W corsair half modular PSU that i bought used and i am not sure if the 6+2pin works because i blew up a 2060 with it and im scared that i will blow up my new rx 6600 so how can i test if it works?

I MEANT A 6+2

Edited by Brimstone
Link to comment
Share on other sites

Link to post
Share on other sites


Euhhh what do you mean 4+2?

 

Firstly STOP using this right now and lets analyze what is going on.

 

Pictures asap. That is NOT a official atx spec connector.

 

What is the make and model of the psu?

 

Are you using different cables?

 

How did you verify the 2060 died?

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

4+2 isn't a plug I'm familiar with, is it a 6+2?
 

22 minutes ago, Brimstone said:

blew up a 2060

Can you describe what happened here? 
it's possible that the cables aren't correct for the PSU. Do you have a multimeter? If so, you can start the PC and use a MM to test voltages are correct
r/AskElectronics - Help with measuring PCIE 8-pin connector voltage using multimeter.

5950X/3080Ti primary rig  |  1920X/1070Ti Unraid for dockers  |  200TB TrueNAS w/ 1:1 backup

Link to comment
Share on other sites

Link to post
Share on other sites

23 minutes ago, jaslion said:


Euhhh what do you mean 4+2?

 

Firstly STOP using this right now and lets analyze what is going on.

 

Pictures asap. That is NOT a official atx spec connector.

 

What is the make and model of the psu?

 

Are you using different cables?

 

How did you verify the 2060 died?

 

 

6+2**

CX750M is the PSU

I didint change them but as I said the PSU was used

The 2060 blew up fortunatly it didint damage antything more than itself

Heres some pictutes:

20240401_174915.jpg

20240401_174911.jpg

20240401_174829.jpg

20240401_174822.jpg

20240401_174729.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

26 minutes ago, OddOod said:

4+2 isn't a plug I'm familiar with, is it a 6+2?
 

Can you describe what happened here? 
it's possible that the cables aren't correct for the PSU. Do you have a multimeter? If so, you can start the PC and use a MM to test voltages are correct
r/AskElectronics - Help with measuring PCIE 8-pin connector voltage using multimeter.

I also think that the cables arent correct so i need to know how can i test it

The GPU just made a huge spark and i immiedietly turned it off 

Link to comment
Share on other sites

Link to post
Share on other sites

ALSO!!!

I tested an old GPU that only had a 6pin connector without the +2 and it worked with no issues

Link to comment
Share on other sites

Link to post
Share on other sites

Main Desktop: CPU - i9-14900k | Mobo - Gigabyte Z690 Aorus Elite AX DDR4 | GPU - ASUS TUF Gaming OC RTX 4090 RAM - Corsair Vengeance Pro RGB 64GB 3600mhz | AIO - H150i Pro XT | PSU - Corsair RM1000X | Case - Phanteks P500A Digital - White | Storage - Samsung 970 Pro M.2 NVME SSD 512GB / Sabrent Rocket 1TB Nvme / Samsung 860 Evo Pro 500GB / Samsung 970 EVO Plus 2tb Nvme / Samsung 870 QVO 4TB  |

 

TV Streaming PC: Intel Nuc CPU - i7 8th Gen | RAM - 16GB DDR4 2666mhz | Storage - 256GB WD Black M.2 NVME SSD |

 

Phone: Samsung Galaxy Z Fold 4 - Phantom Black 512GB |

 

Link to comment
Share on other sites

Link to post
Share on other sites

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, Brimstone said:

I have a multimeter and i want to test it with it but idk how

On the 8 pin PCIE cable(6+2 pin) it should be yellow for positive and black for ground. Using a multimeter if it's working right you should see 12v.

https://help.corsair.com/hc/en-us/articles/17759727689997-PSU-CORSAIR-PSU-Pinout-Diagram

Main Desktop: CPU - i9-14900k | Mobo - Gigabyte Z690 Aorus Elite AX DDR4 | GPU - ASUS TUF Gaming OC RTX 4090 RAM - Corsair Vengeance Pro RGB 64GB 3600mhz | AIO - H150i Pro XT | PSU - Corsair RM1000X | Case - Phanteks P500A Digital - White | Storage - Samsung 970 Pro M.2 NVME SSD 512GB / Sabrent Rocket 1TB Nvme / Samsung 860 Evo Pro 500GB / Samsung 970 EVO Plus 2tb Nvme / Samsung 870 QVO 4TB  |

 

TV Streaming PC: Intel Nuc CPU - i7 8th Gen | RAM - 16GB DDR4 2666mhz | Storage - 256GB WD Black M.2 NVME SSD |

 

Phone: Samsung Galaxy Z Fold 4 - Phantom Black 512GB |

 

Link to comment
Share on other sites

Link to post
Share on other sites

To begin with: why did you buy a 12 year old PSU that was nowhere near good when it was new? Green label Corsair CX is trash!

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, --SID-- said:

To begin with: why did you buy a 12 year old PSU that was nowhere near good when it was new? Green label Corsair CX is trash!

The cx750m green label was the ok one the rest was real bad.

 

But yeah op id just replace this as I have a feeling you got some random ass cables that cost you a 2060.

 

As far as I remember that was not the font used on their cables.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×