Bricked my LSI7204EP-LC and its in a reset state

[winnipegm]

I put wrong firmware. Suggestions?

 

 

 

 

[OddOod]

Have you tried the suggestions here?
https://forums.servethehome.com/index.php?threads/lsi-9340-8i-chip-is-in-reset-state-attempting-host-boot.35672/

 

[winnipegm]

Did you see my screenshots?

[m9x3mos]

3 hours ago, winnipegm said:

Did you see my screenshots?

Have you tried the steps from the last post in that link provided?
You should be able to use the pre boot environment from Broadcom to attempt recovery as per that thread and I have done in the past with different cards.
https://www.broadcom.com/support/knowledgebase/1211161499804/lsi-pre-boot-usb-tool-download?SID=31285X1023697X489e0521ec1e917e7f3b92a52dde291e&API1=100&API2=100062990&cjid=100062990&cjevent=f81600c9dda011ee837f9e7e0a82b82d

[winnipegm]

You mean this?

 

[winnipegm]

my result

 

[m9x3mos]

2 hours ago, winnipegm said:

my result

 

That was the area I was thinking about. 

Odd that it isn't showing up and i don't think the fc cards would behave different from regular than the 9300 16i SAS cards there. 

If you don't see it there I am sadly out of ideas.

Not sure if your motherboard has uefi or legacy bios. 

I always ran it with a machine that had legacy bios and nothing else connected when I have run it in the past. 

[winnipegm]

I tried on my hp server and supermicro so tried both uefi and legacy