I think i burn my 2 motherboard and 2 cpu and probably my power supply, HELP!

[JEstevez]

Hello.

So I'm adding new case for my PC my first gaming case something standard simple regular.

 

Well I was stalling my fans which were very weird they had the power connector and then they had like a two pin thing that didn't connect with anything in my motherboard. 

The problem came when I was stalling my master cooler liquid cooling system not 240 mm radiator.

 

I finished connecting everything turned on the PC without making my cable management noticed that I didn't place the fans the correct way so I had to make changes, disconnect everything and put everything back in and took me the whole day because after I connect everything back it wasn't turning on the screen or turning on properly.

 

I believe I burnt everything because The Cooler Master AI old I purchased brings a little controller which I connect everything as the tutorials in YouTube but didn't change the left the LEDs for some reason.

So my dumb head thought okay my motherboard has a LED header so I assume the Le header that is on the controller must be compatible with the one in my motherboard so I connected and all the sudden it smelled burnt. 

I tried to connect the motherboard again I try with another CPU I tried the same CPU with another motherboard vice versa I managed to have it turned on with my old motherboard and then when I try to build everything again with my old motherboard it didn't work anyways I'm not sure if it has to do with the power supply or anything because I tried my old motherboard with the same ram same graphics card same everything and it did work and then it didn't

 

Motherboard: Tuf z390 plus wifi

Ram: 16gb

Powe supply: 500w

GPU: rx570

Pls help.

Things i tried.

 

 

 

-Reset bios by Removing the CMOS battery

 

-Clear CMOS jumper

 

-Used a different RAM 

 

-Unplug and plugged everything over and over.

 

-Tried without GPU since my cpu have intergrade graphics 

[JEstevez]

31 minutes ago, JEstevez said:

Hello.

So I'm adding new case for my PC my first gaming case something standard simple regular.

 

Well I was stalling my fans which were very weird they had the power connector and then they had like a two pin thing that didn't connect with anything in my motherboard. 

The problem came when I was stalling my master cooler liquid cooling system not 240 mm radiator.

 

I finished connecting everything turned on the PC without making my cable management noticed that I didn't place the fans the correct way so I had to make changes, disconnect everything and put everything back in and took me the whole day because after I connect everything back it wasn't turning on the screen or turning on properly.

 

I believe I burnt everything because The Cooler Master AI old I purchased brings a little controller which I connect everything as the tutorials in YouTube but didn't change the left the LEDs for some reason.

So my dumb head thought okay my motherboard has a LED header so I assume the Le header that is on the controller must be compatible with the one in my motherboard so I connected and all the sudden it smelled burnt. 

I tried to connect the motherboard again I try with another CPU I tried the same CPU with another motherboard vice versa I managed to have it turned on with my old motherboard and then when I try to build everything again with my old motherboard it didn't work anyways I'm not sure if it has to do with the power supply or anything because I tried my old motherboard with the same ram same graphics card same everything and it did work and then it didn't

 

Motherboard: Tuf z390 plus wifi

Ram: 16gb

Powe supply: 500w

GPU: rx570

Pls help

Things i tried.

 

-Reset bios by Removing the CMOS battery

-Clear CMOS jumper

-Used a different RAM 

-Unplug and plugged everything over and over.

-Tried without GPU since my cpu have intergrade graphics 

[-rascal-]

I'm trying to understand what happened.

 

1. You transferred your system into a NEW case.
2. Installing the fans (new or old?) but they have 2 extra pins..?
3. Something wrong when installing the (new or old)? CoolerMaster 240mm AIO..?
4. You plugged things in, turned on the power, and the smell of burned electronics

Can you give us a URL/link or the brand + model of fans you have?

Can you give us a URL/link or the brand + model of the AIO you have?

 

All the fan headers on the motherboard are 4-pin (PWN control) fan headers.

I don't see any headers/connectors on the motherboard that are 2-pin.

 

I'm thinking you may have plugged the RGB / ARGB connecter from the fan / AIO into the wrong place.

That may have damaged the fans / AIO / or the headers on the motherboard.

 

Please answer the above questions, so we have more information.