Jump to content

Help!! No signal after CMOS reset when using both ram slot

kennkai
 Share
Go to solution Solved by kennkai,

Update, the issue has been fixed. Trief to re-enable A-XMP profile to run to 3200Mhz for both ram. I think both ram wont run because it run on 2666Mhz when XMP disabled

Posted

This is a follow up post for previous thread regarding CMOS reset issue. A new problem rises. When using both ram slot my pc keep showing no signal and stuck at EZ debug light for ram. 

 

I have tried both slot using single slot setting and also tried swapping both ram in the same ram slot and it work as intended, no issue. 

 

Here's my general info of my specs

Mobo: MSI B550m Pro (2 ram slots) 

GPU: RTX 2060

CPU: Ryzen 5 3600

Ram: KLEVV 2x8gb 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, kennkai said:

This is a follow up post for previous thread regarding CMOS reset issue. A new problem rises. When using both ram slot my pc keep showing no signal and stuck at EZ debug light for ram. 

 

I have tried both slot using single slot setting and also tried swapping both ram in the same ram slot and it work as intended, no issue. 

 

Here's my general info of my specs

Mobo: MSI B550m Pro (2 ram slots) 

GPU: RTX 2060

CPU: Ryzen 5 3600

Ram: KLEVV 2x8gb 

here's my ez debug light

IMG_20240206_192027__01.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, kennkai said:

here's my ez debug light

IMG_20240206_192027__01.jpg

Have you tried reseating CPU, might help with any possible memory controller faults?

System specs:

 

 

CPU: Ryzen 7 7800X3D [-30 PBO all core]

GPU: Sapphire AMD Radeon RX 7800 XT NITRO+ [1050mV, 2.8GHz core, 2.6Ghz mem]

Motherboard: MSI MAG B650 TOMAHAWK WIFI

RAM: G.Skill Trident Z5 NEO RGB 32GB 6000MHz CL32 DDR5

Storage: 2TB SN850X, 1TB SN850 w/ heatsink, 500GB P5 Plus (OS Storage)

Case: 5000D AIRFLOW

Cooler: Thermalright Frost Commander 140

PSU: Corsair RM850e

 

PCPartPicker List: https://uk.pcpartpicker.com/list/QYLBh3

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, kennkai said:

here's my ez debug light

IMG_20240206_192027__01.jpg

If possible try a different cpu or motherboard

I edit my messages more than not –

Probably some dude on the internet

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, TatamiMatt said:

Have you tried reseating CPU, might help with any possible memory controller faults?

Haven't tried this but all adapter from the motherboard seems work to fine before the reset. Also both slot did not show any error when only using single slot all smooth. Just for dual slot option this problem occured

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
10 minutes ago, Hellowpplz said:

If possible try a different cpu or motherboard

Not possible right now, im out of any spare cpu/mobo. Is there any chance that the mobo setting disable dual slot ram running? Becuase for a single slot option it works perfectly (both slot and both ram) 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
  • Solution

Update, the issue has been fixed. Trief to re-enable A-XMP profile to run to 3200Mhz for both ram. I think both ram wont run because it run on 2666Mhz when XMP disabled

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×