Jump to content

? 10 Port | 8X2.5G+ 2x 10G SFP(VLAN) poe+ Unmanaged Network Switch, with One-Key VLAN?

does anyone make a


10 Port | 8X2.5G+ 2x 10G SFP(VLAN) poe+ Unmanaged Network Switch, with One-Key VLAN

for under 375$ ish 400$ max my budget limit that also covers shipping ?

 

i found a 6 port ver from

NICGIGA ther 6 Port 2.5G Ethernet Switch with 4X 2500Mbps + 2X 10G SFP Uplink Port , Unmanaged, One-Key VLAN


an while i thought about getting 2 with the 2nd as a poe variant with one-key-vlan
which would cover the 4 poe devices i have nicgiga doesn't have one

 


because either amazon doesn't carry one from them or they dont have one at all
so if anyone could point me to one from them an or a similar priced brand like SODOLA or YuanLey
that would be great

 

 

the reason i need one like this is it suits my needs

in the past i used to have a 5 port aumox SG305P with poe an one key vlan an it did my setup at the time very well especially the one key vlan solved a lot of issues i had with my network setup an gear

 

 

but now that iv upgraded all my pc's ,AP's , & home servers to a mix of 2.5 & 10gbit connects a switch that matches is needed


an the nicgiga almost fits the bill but is shy the 4 extra 2.5gbit ports i need.


an while getting two would technicality solve this problem
my overall reason for wanting just one with the stated config an amount of ports

 

 

is this , iv got one big cyberpower ups battey backup that covers all eight units of
my network setup an thers not room for a ninth.

 

 

an id like to stick with a unmanaged switch but wouldnt be oppesed to a managed on like the
SODOLA 8-Port Gigabit/10G POE Switch Managed, 150W,160Gbps Bandwidth,BT90W Supported Smart Web Managed


thats in my max price range of 400$


i just give up on doing a vlan setup myself because i ovously didnt know how to do it right when i tried with my current


EnGenius Fit EWS2910P-FIT (the one im going to replace)

hence why id prefer a one key vlan option with the stated ports an config.

so can you guys help me out ?

 

 

 


My to be layout after upgrade (currently all running at 1gbit with no vlan)

 

networksetup.thumb.png.e622bb31624803f22783914dae20cb27.png

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, johnny45 said:

does anyone make a


10 Port | 8X2.5G+ 2x 10G SFP(VLAN) poe+ Unmanaged Network Switch, with One-Key VLAN

for under 375$ ish 400$ max my budget limit that also covers shipping ?

 

i found a 6 port ver from

NICGIGA ther 6 Port 2.5G Ethernet Switch with 4X 2500Mbps + 2X 10G SFP Uplink Port , Unmanaged, One-Key VLAN


an while i thought about getting 2 with the 2nd as a poe variant with one-key-vlan
which would cover the 4 poe devices i have nicgiga doesn't have one

 


because either amazon doesn't carry one from them or they dont have one at all
so if anyone could point me to one from them an or a similar priced brand like SODOLA or YuanLey
that would be great

 

 

the reason i need one like this is it suits my needs

in the past i used to have a 5 port aumox SG305P with poe an one key vlan an it did my setup at the time very well especially the one key vlan solved a lot of issues i had with my network setup an gear

 

 

but now that iv upgraded all my pc's ,AP's , & home servers to a mix of 2.5 & 10gbit connects a switch that matches is needed


an the nicgiga almost fits the bill but is shy the 4 extra 2.5gbit ports i need.


an while getting two would technicality solve this problem
my overall reason for wanting just one with the stated config an amount of ports

 

 

is this , iv got one big cyberpower ups battey backup that covers all eight units of
my network setup an thers not room for a ninth.

 

 

an id like to stick with a unmanaged switch but wouldnt be oppesed to a managed on like the
SODOLA 8-Port Gigabit/10G POE Switch Managed, 150W,160Gbps Bandwidth,BT90W Supported Smart Web Managed


thats in my max price range of 400$


i just give up on doing a vlan setup myself because i ovously didnt know how to do it right when i tried with my current


EnGenius Fit EWS2910P-FIT (the one im going to replace)

hence why id prefer a one key vlan option with the stated ports an config.

so can you guys help me out ?

 

 

 


My to be layout after upgrade (currently all running at 1gbit with no vlan)

 

networksetup.thumb.png.e622bb31624803f22783914dae20cb27.png

 

 

Truly riveting marketing strategy with that PoE managed switch: image.png.f36fbdda61029ed61933e699c80e45a9.png

 

What manages your PoE cameras, the Ubuntu server? It might be worth segregating that since it'll have a ton of traffic if you're using a recording server. That would likely be just the managed PoE switch, then have something separate for your desktops/AP. Why unmanaged?

Ryzen 7950x3D PBO +200MHz / -15mV curve CPPC in 'prefer cache'

RTX 4090 @133%/+230/+1000

Builder/Enthusiast/Overclocker since 2012  //  Professional since 2017

Link to comment
Share on other sites

Link to post
Share on other sites

2 answers

 

1.What manages my PoE cameras ,well at one time a dedicated pvr that has since died so yes the ubuntu server is the planed platform but i havent done that yet till i get the new switch.

 

2.Why unmanaged well like i stated

 

"doing a vlan setup myself didnt work because obviously didnt know how to do it right when i tried , an in

the past i used to have a 5 port aumox SG305P with poe an one key vlan an it did my setup at the time very well

especially the one key vlan solved a lot of issues i had with my network setup an gear "

 

thats why unmanaged

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×