Jump to content

New motherboard causing GPU booting issues..?

A-Aron1423
 Share
Posted

I am having an issue with my GPU not functioning properly. I bought new parts off of Amazon and put it together properly. Double checked everything and made sure all was snug fitted. When I powered it on everything turned on properly, but the GPU fans would spin up and then shut off; the VGA and boot light were on on the motherboard and then turned off after a few sec. When I reset it, it then booted into Windows. I checked to see if all the hardware was being detected and all was fine but the GPU wouldnt show up in the device manager. In “Display Adapters” it just said “Microsoft Basic Display Adapter”. I could feel the GPU getting warm so I believe it’s getting ample power from the PSU. I took another GPU and installed it and it had the same outcome as well; it wouldn’t show up in Display Adapters. Then I put my GPU into another PC and it showed up fine. I swapped cables out with each other, and took out my cable extensions but same issue. Is there a problem with my motherboard? Please help I am lost!

 

Cpu: Intel Core i5 13400F

Mobo: AsRock B760M Steel Legend

Gpu: Asus Dual RTX 4070

Ram: Corsair Vengence DDR5 6000Mhz

Psu: MSI MPG A650GF 80+ Gold

Sleeved Cable Extensions


Vetroo Fans and AiO Cooler

 

All inside a Deepcool CH370 Micro-ATX case

Link to comment
https://linustechtips.com/topic/1534341-new-motherboard-causing-gpu-booting-issues/
Share on other sites
Link to post
Share on other sites
Posted
40 minutes ago, A-Aron1423 said:

I am having an issue with my GPU not functioning properly. I bought new parts off of Amazon and put it together properly. Double checked everything and made sure all was snug fitted. When I powered it on everything turned on properly, but the GPU fans would spin up and then shut off; the VGA and boot light were on on the motherboard and then turned off after a few sec. When I reset it, it then booted into Windows. I checked to see if all the hardware was being detected and all was fine but the GPU wouldnt show up in the device manager. In “Display Adapters” it just said “Microsoft Basic Display Adapter”. I could feel the GPU getting warm so I believe it’s getting ample power from the PSU. I took another GPU and installed it and it had the same outcome as well; it wouldn’t show up in Display Adapters. Then I put my GPU into another PC and it showed up fine. I swapped cables out with each other, and took out my cable extensions but same issue. Is there a problem with my motherboard? Please help I am lost!

 

Cpu: Intel Core i5 13400F

Mobo: AsRock B760M Steel Legend

Gpu: Asus Dual RTX 4070

Ram: Corsair Vengence DDR5 6000Mhz

Psu: MSI MPG A650GF 80+ Gold

Sleeved Cable Extensions


Vetroo Fans and AiO Cooler

 

All inside a Deepcool CH370 Micro-ATX case

did you test it in another pcie port? 

 

Link to post
Share on other sites
Posted
20 minutes ago, A-Aron1423 said:

No, connected to the motherboard

did you try installing the nvidia driver package? 

i've seen basic gpu driver when it's not auto installing crap gpu drivers from windows update. 

and you did run DDU first? 

 

when one of my 1080ti's broke down it killed my board... it was basic display adapter then too if i don't recall it too wrong. ended up replacing board and gpu's then(since i had SLI). 

 

 

Link to post
Share on other sites
Posted
  • Author
20 minutes ago, Robchil said:

did you try installing the nvidia driver package? 

i've seen basic gpu driver when it's not auto installing crap gpu drivers from windows update. 

and you did run DDU first? 

 

when one of my 1080ti's broke down it killed my board... it was basic display adapter then too if i don't recall it too wrong. ended up replacing board and gpu's then(since i had SLI). 

 

 

I did not try do any graphics driver installs or windows update I will try that 👍

Link to post
Share on other sites
Posted
  • Author
Just now, A-Aron1423 said:

I did not try do any graphics driver installs or windows update I will try that. But I am booting off my ssd that i previously ran an RTX 2080 which i had all graphics drivers for that. Would those work for a 4070 or do i need to update them?

Link to post
Share on other sites
Posted
16 minutes ago, A-Aron1423 said:
18 minutes ago, A-Aron1423 said:

I did not try do any graphics driver installs or windows update I will try that. But I am booting off my ssd that i previously ran an RTX 2080 which i had all graphics drivers for that. Would those work for a 4070 or do i need to update them?

yeah i would use DDU regardless as there might be incompatible settings that don't change when you just plug in a new card. 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×