Strix 3080 with EK Quantum vector 2 too high temperatures ?

[Ajinta1]

Hello I have a question for you. I am using Asus strix 3080 GPU together with Quantum vector 2 block with active backplate and graphic card is reaching 60 to 62 degrees on the core and almost 80 degress on hotspot while memory is at 60. this temperatures seemed a bit too hot for my likings so I repasted and remaunted the bloct getting same resualt. I wanted to ask if thise temperatures are normal couse honestly they are just abnot 10 degress lover than with regular asus cooler ?

 

This is how my machine looks on pics below ...cpu temps however are superb on 13900k with deliding and magnitude block usualy not reaching 80 degress. It is just gpu i think shall be lover. I want to know are tubes conected into the terminal positioned the right way ?

 

 

[SpookyCitrus]

If you run MSI Kombustor or GPU Benchmarks what is the package temperature? Not core and hotspot but the total GPU package temperature. Your cores and hotspots individual temps are going to be hotter than the package temperature, you want to go off of package temp under full load. MSI Kombustor will tell you that. Run a stress test at your native resolution for about half an hour to an hour if you want the best idea temp wise. And let us know what Kombustor says the temp is. Anything in the high 60s even mid 70s is average for a custom loop of this caliber on max synthetic load. However, some will run warmer depending on configuration and duration of load time, as well as external factors. If you're running hotter than 80c package temp on the GPU something is most likely wrong.

[Ajinta1]

I did so and ran combustor for about 40 minutes, my gpu is at max 121% power limit and temperature was 59 degress at which it stabilised after 20 minutes....core clock was consistent 1980mhz.