Ryzen 5 5600 temps

[ryzen55600fan]

I recently finished a new build with a Ryzen 5 5600 (using the stock cooler), but I noticed while changing something in the BIOS that my CPU temps were at 66°, is this normal for this CPU and Cooler combo? I know the stock cooler isn't fantastic but this still feels a little too high!

[Poinkachu]

5 minutes ago, ryzen55600fan said:

I recently finished a new build with a Ryzen 5 5600 (using the stock cooler), but I noticed while changing something in the BIOS that my CPU temps were at 66°, is this normal for this CPU and Cooler combo? I know the stock cooler isn't fantastic but this still feels a little too high!

66c at BIOS ? that's hot.

What is your PC case ?

[ryzen55600fan]

16 minutes ago, Poinkachu said:

66c at BIOS ? that's hot.

What is your PC case ?

I'm using an NZXT H510!

[Poinkachu]

15 minutes ago, ryzen55600fan said:

I'm using an NZXT H510!

H510 Flow?? H510 Elite? Normal H510??  Be more specific

If you by some reason don't know, just take a pic of the front of the PC case.

 

Also, try tightening the CPU Cooler's screw, just don't go ham at it.

 

[ryzen55600fan]

6 minutes ago, Poinkachu said:

H510 Flow?? H510 Elite? Normal H510??  Be more specific

 

Also, try tightening the CPU Cooler's screw, just don't go ham at it.

 

Just the base model, I'll give tightening it a go!

[Poinkachu]

8 minutes ago, ryzen55600fan said:

Just the base model, I'll give tightening it a go!

base model means standard H510 with closed off front then.

 

If so, then also try opening your side panel and see if it helps a lot. (if tightening screws doesn't help much)

If it does, then most likely you have an airflow issue sir.

[ryzen55600fan]

10 minutes ago, Poinkachu said:

base model means standard H510 with closed off front then.

 

If so, then also try opening your side panel and see if it helps a lot. (if tightening screws doesn't help much)

If it does, then most likely you have an airflow issue sir.

Turns out I completely forgot to tighten the top left screw LOL

 

Temps are hovering around 50° in windows with the side panel on now!

[Poinkachu]

6 minutes ago, ryzen55600fan said:

Turns out I completely forgot to tighten the top left screw LOL

 

Temps are hovering around 50° in windows with the side panel on now!

 

Well, that's much better.

Probably won't get much lower due to airflow constraint because of PC case & cooler's passive heat sinking capability.

[Ralfi]

I'm curious. Why did you decide on that case? 

 

You weren't watching an early Jayz2Cents video by any chance?

[ryzen55600fan]

On 5/26/2023 at 8:40 PM, Ralfi said:

I'm curious. Why did you decide on that case? 

 

You weren't watching an early Jayz2Cents video by any chance?

It was on sale, I plan on swapping to an ASUS ap201 later on though!

[NorKris]

keep in mind that  Bios is not idle