Jump to content

2021 8" OneXPlayer 1S [11th,4C,G] + RX 6900 XT @ 32Gbps-TB4 (Razer Core X) + Win11 // Dual Monitor Setup

TechBored0m
 Share

Quote

Hardware:

OneXPlayer 8" i7-1164G7 - Indigogo Campaign:

  • Screen Resolution: 2560x1600 IPS Display
  • RAM: 16gb LPDDR4X 4266MHz
  • CPU: 11th Gen i7-1165G7
  • iGPU: Iris Xe Graphics G7 96EU
  • SSD: Sabrent 2TB Rocket NVMe 4.0
  • Battery: 15300mAh
  • Controls: Japanese ALPS Stick, Xbox Layout
  • OS: Windows 11 Pro
  • I/O: Two TB4 Posts, one USB A Port. 3.5mm Headphone Jack. Magnetic Keyboard Attachment

ia2SUg4.jpeg

EGPU Enclosure:

Razer Core X

n6QC6qB.jpeg

S7zo82Y.jpg

Thunderbolt Dock:

(Generic Branded) FlePow Thunderbolt 3 docking Station

  • Has a bunch of IO. Most importantly it has 2x Thunderbolt 3 Ports. Main and Passthrough.

FzEmzSP.jpeg

GPU:

PowerColor Red Devil RX 6900 XT 16gb

LU25l3z.jpeg

Hx7u1RK.jpg

Monitors:

LG 27UN850-W 27 Inch - 4K
LG 27UL650-W 27 Inch - 4K

4875jpK.jpeg

Quote

Benchmarks:

CPU-Z:

ydLpJcY.pngTtrM22y.pnggsU5HuJ.png

GPU-Z:

cpZpx3e.png

AIDA64:

bGkxD9v.png

HWiNFO64:

FBnyfuM.png

Keqf4g9.png

Unigine Valley Benchmark:

DLojIXs.png

3DMark:

cQLgTds.png

15epL1m.png

KPjcKLh.png

LEhXavz.png

oWJFD1Q.png

z1Xe2hB.png

08tzUV0.png

gPpBBfZ.png

 

 

Quote

My Configurations and Tips:

OneXplayer Config (i7-1165G7 Specific):

  • Disabled Wallpaper slideshows

  • Do not use Overlays. Turn off hw acceleration in Discord and overlays.

  • Disable your iGPU when connected to your EGPU. @ciphray.bat has a nice script available that does this automatically.

  • Configure your TDP. Have my Onexplayer running 40w TDP while docked.

  • Set max performance in your Power Options

  • Disable the High precision event timer driver in Device Manager under System Devices

  • CMD Commands
    • Run these commands in an admin prompt to help improve performance
      bcdedit /set useplatformclock no
      
      bcdedit /set useplatformtick yes
      
      bcdedit /set disabledynamictick yes
  • BIOS
    • These settings in the bios will help improve performance of your EGPU
      • Advanced < Platform Settings < TCSS Platform Settings
      • Set Disable IOMMU under Control Iommu Pre-boot Behavior
      • Chipset < System Agent (SA) Configuration
      • Enable - Skip Skanning of External Gfx Card
      • OPTIONAL - Enable - Intel Graphics Pei Display Peim

My AMD Settings:

  • Enabled Radeon Anti-lag
  • Enabled Radeon Image Sharpening
  • Enabled Radeon Enhanced Sync
  • Monitor Specific: Virtual Super Resolution, GPU Scaling, Integer Scaling, Voltage Swing(Set to: 1), PreEmphasis(Set to: 2)
Quote

Summary:

I've been working on my setup on and off over the last year or so. Haven't had time to sit down until recently. Stoked to share what I put together. Moved through a few ThunderBolt 3 laptops. First, being a 2015 13" Macbook Pro, then I bought a 2019 16" Macbook Pro, and now this OneXPlayer. I still have the 2019 MacBook Pro, but I opted to splurge on the OneXPlayer after encountering too many issues with bootcamp eGPU. (I don't like to have to open and close the laptop repeatedly just to get a cable to connect lol.)

This is pretty much exactly what I was looking for in terms of a gaming setup. The only gripe I really have is the fact that I didn't opt for higher refresh rate monitors. Might swap these out eventually, but for now they play games great

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×