Ram oc

[Ebony Falcon]

So I have Corsair vengeance 3200mhz

16-18-18-36 

that’s the xmp profile 

I can run same timings 3333 mhz no problems 

 

if I wanted to tighten the timings at 3200mhz where do I start ? 

 

my pc is for gaming only will tightening ram make much of a difference/ is it worth the time and effort ? 
Or is my kit low latency anyways ? 

[MingLee420]

4 minutes ago, Ebony Falcon said:

So I have Corsair vengeance 3200mhz

16-18-18-36 

that’s the xmp profile 

I can run same timings 3333 mhz no problems 

 

if I wanted to tighten the timings at 3200mhz where do I start ? 

 

my pc is for gaming only will tightening ram make much of a difference/ is it worth the time and effort ? 
Or is my kit low latency anyways ? 

tuning a ram kit is a bit time consuming and hard at first but will gain quite a bit of fps in the lows and or more fps if cpu bound, this guide is very helpful https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4 OC Guide.md
 

[bal7]

ur fps u will get from ram depends on ur cpu and motherboard

[Ebony Falcon]

7 minutes ago, MingLee420 said:

tuning a ram kit is a bit time consuming and hard at first but will gain quite a bit of fps in the lows and or more fps if cpu bound, this guide is very helpful https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4 OC Guide.md
 

I did a latency test in aida 64 and it’s 50.7 is that normal ?

[bal7]

3 minutes ago, Ebony Falcon said:

I did a latency test in aida 64 and it’s 50.7 is that normal ?

oh, ur z370 is already at max speeds lol, u can get 3333 mhz without timings, timings arent so important

[MingLee420]

6 minutes ago, Ebony Falcon said:

I did a latency test in aida 64 and it’s 50.7 is that normal ?

seems in spec for 3200 xmp

[Ebony Falcon]

2 minutes ago, bal723 said:

oh, ur z370 is already at max speeds lol, u can get 3333 mhz without timings, timings arent so important

Timings seem to be very important that’s why I’m here asking 

[MingLee420]

2 minutes ago, bal723 said:

oh, ur z370 is already at max speeds lol, u can get 3333 mhz without timings, timings arent so important

timings definitely improve fps, but you need a mix of freq and timings to get the max out of the ram kit

[bal7]

hm, just do whatever ur ram allows you

[MingLee420]

21 minutes ago, Ebony Falcon said:

So I have Corsair vengeance 3200mhz

16-18-18-36 

that’s the xmp profile 

I can run same timings 3333 mhz no problems 

 

if I wanted to tighten the timings at 3200mhz where do I start ? 

 

my pc is for gaming only will tightening ram make much of a difference/ is it worth the time and effort ? 
Or is my kit low latency anyways ? 

download thaiphoon burner to see what the ram ic it is

[Ebony Falcon]

3 minutes ago, MingLee420 said:

timings definitely improve fps, but you need a mix of freq and timings to get the max out of the ram kit

It’s microstutters I’m trying to eliminate and I’m not sure if it’s my ram causing it or if it’s just the game

[MingLee420]

1 minute ago, Ebony Falcon said:

It’s microstutters I’m trying to eliminate and I’m not sure if it’s my ram causing it or if it’s just the game

is there anything in the background causing it, cpu at 100 percent or something also what game is it?

[Ebony Falcon]

3 minutes ago, MingLee420 said:

download thaiphoon burner to see what the ram ic it is

Will do when i get back home 

[Ebony Falcon]

Just now, MingLee420 said:

is there anything in the background causing it, cpu at 100 percent or something also what game is it?

No I have very minimum programs installed 

only thing open and run in background are 

Msi afterburner and

px1

 

game currently is assassins creed Valhalla however if I spin the camera 360 in any game I always get at least one micro stutter but the fps never drops 

 

[MingLee420]

1 minute ago, Ebony Falcon said:

No I have very minimum programs installed 

only thing open and run in background are 

Msi afterburner and

px1

 

game currently is assassins creed Valhalla however if I spin the camera 360 in any game I always get at least one micro stutter but the fps never drops 

 

ok yh youd benefit from ram tuning

[Ebony Falcon]

4 minutes ago, MingLee420 said:

ok yh youd benefit from ram tuning

From what I gather running the 3333mhz will reduce the latency also as it’s refreshing faster 

 

Do u think it’s better to run that or tune for 3200?

[MingLee420]

Just now, Ebony Falcon said:

From what I gather running the 3333mhz will reduce the latency also as it’s refreshing faster 

 

Do u think it’s better to run that or tune for 3200?

you could prob do 3600 with same timings or maybe even lower timings but cant know for sure until we know what ic it is

[Ebony Falcon]

Just now, MingLee420 said:

you could prob do 3600 with same timings or maybe even lower timings but cant know for sure until we know what ic it is

I already tried 3600 and wouldn’t work 

even with 1.35v system agent and 1.375 to the dram 

 

yeah il check that asap 

[freeagent]

Chances are you probably won’t be able to drop the timings much. If you want tight timings you will have to ditch that kit and grab some B-Die. And from there you will be able to do what you want.

[Ebony Falcon]

3 minutes ago, freeagent said:

Chances are you probably won’t be able to drop the timings much. If you want tight timings you will have to ditch that kit and grab some B-Die. And from there you will be able to do what you want.

So I should just push the 3333mhz frequency then to get the most out of it ? 
 

is my ram absolutely terrible for gaming ? 

[Ebony Falcon]

48 minutes ago, MingLee420 said:

download thaiphoon burner to see what the ram ic it is

Saying it’s a virus when I try open the program 

is there another way to find out ic

[Ebony Falcon]

42 minutes ago, MingLee420 said:

you could prob do 3600 with same timings or maybe even lower timings but cant know for sure until we know what ic it is

 

[Ebony Falcon]

43 minutes ago, freeagent said:

Chances are you probably won’t be able to drop the timings much. If you want tight timings you will have to ditch that kit and grab some B-Die. And from there you will be able to do what you want.

Hynix m die

[MingLee420]

24 minutes ago, Ebony Falcon said:

Hynix m die

i think buildzoid does a vid on it, you might be able to do 3400mhz with the same primary but if 3400 works try higher freqs until it doesnt boot then if 3400 is the max or whatever it is follow the guide to lower timings

[Ebony Falcon]

3 minutes ago, MingLee420 said:

i think buildzoid does a vid on it, you might be able to do 3400mhz with the same primary but if 3400 works try higher freqs until it doesnt boot then if 3400 is the max or whatever it is follow the guide to lower timings

Thanks il check it out

got it down to 48.7ns

 

whats considered decent for gaming in ns