360mm In Front of 750D

[AMD Lover]

If i take out the 5.25" bays can i fit a 360mm rad in the front.

[HeathCliff]

It is possible with some modding. However, seeing as the the bottom 2 get the air through the sides while the bay area is sealed off, the top fan will be pretty much useless.

 

Judging from your system (If you are planning on SLI'ing in the future) an 360 in the roof and a 240/280 in the front should be adequate for a cpu, and 2 gpu's.

[AMD Lover]

It is possible with some modding. However, seeing as the the bottom 2 get the air through the sides while the bay area is sealed off, the top fan will be pretty much useless.

 

Judging from your system (If you are planning on SLI'ing in the future) an 360 in the roof and a 240/280 in the front should be adequate for a cpu, and 2 gpu's.

Well im wanting white rads. I can get a 21mm thick one for the top and a 21mm thick in the front or i could mix brands which i dont really want to do because it just annoys me when i see different branded parts and put a 21mm thick in the front and a 60mm thick in the top.

[HeathCliff]

Well im wanting white rads. I can get a 21mm thick one for the top and a 21mm thick in the front or i could mix brands which i dont really want to do because it just annoys me when i see different branded parts and put a 21mm thick in the front and a 60mm thick in the top.

 

I feel your pain. My recommendation will be to buy any thick rad and spray paint it white. Make sure to cover the fins completely, spray on your primer and then spray on a few layers of your paint and voila. 

 

There are quite a few guides on the internet if you are interested. 

[AMD Lover]

I feel your pain. My recommendation will be to buy any thick rad and spray paint it white. Make sure to cover the fins completely, spray on your primer and then spray on a few layers of your paint and voila. 

What would my approx temps be with a 4770K (Possibly Delided and OC'd to 45Ghz @ 1.35v) and a 780 (Overclocked) with two 21mm thick rads, one 360 and one 240? CPU runs around 80 with an H100i right now.

 

 

Ambient=70oF

[HeathCliff]

What would my approx temps be with a 4770K (Possibly Delided and OC'd to 45Ghz @ 1.35v) and a 780 (Overclocked) with two 21mm thick rads, one 360 and one 240? CPU runs around 80 with an H100i right now.

 

 

Ambient=70oF

 

Judging from previous posts, I'd approximate, at load, 60-70ish. But, it is an approximation, so don't go rushing in and buy thoughtlessly without doing  a bit more research. 

[AMD Lover]

Judging from previous posts, I'd approximate, at load, 60-70ish. But, it is an approximation, so don't go rushing in and buy thoughtlessly without doing  a bit more research. 

Humm, i was hoping i could get down to 50-60, ill do a bit more research though

[Anthony10]

@TheNinjaNextDor

[skorpien]

Wait, you want to go lower than ambient temps with watercooling? Watercooling is ambient cooling. You'll never get lower than ambient temps.  :huh:

[consoleconvergence2pc]

yes a 360mm rad in the front will fit if you take out the 5.25" bays

[AMD Lover]

Wait, you want to go lower than ambient temps with watercooling? Watercooling is ambient cooling. You'll never get lower than ambient temps.  :huh:

50-60oC, i gave ambient in Fahrenheit

[skorpien]

50-60oC, i gave ambient in Fahrenheit

Ahh, that makes more sense. I thought of that after I posted but wasn't exactly sure.

Personally I think you'd be just fine with a 360 and 240 rad. You can also add another 120 rad at the bottom. The 750D has space for a 240 there but as you're mounting a radiator in the front, one of the fan holes will be blocked.

[airdeano]

If i take out the 5.25" bays can i fit a 360mm rad in the front.

 

like this?

 

 

i guess you can

[AMD Lover]

like this?

 

750D front 360.jpg

 

i guess you can

What model is that pump/res combo?

[airdeano]

What model is that pump/res combo?

 

EK 140 w/D5