Small mATX case needed

[GrayTech]

I would like to build a small formfactor PC for travelling with hardware I already have at home. Therefore I'm looking for a small case which can handle a mATX motherboard, two slot GPU (200mm) and an ATX PSU. Price should be less then 100€ (GER). Currently I'm looking at the Jonsbo V4 which is available for around 60-65€ but I would like to get some other recommendations.

I'm not too concerned about cooling since the Hardware I'm using isn't that power hungry.

[heli1337]

26 minutes ago, GrayTech said:

I would like to build a small formfactor PC for travelling with hardware I already have at home. Therefore I'm looking for a small case which can handle a mATX motherboard, two slot GPU (200mm) and an ATX PSU. Price should be less then 100€ (GER). Currently I'm looking at the Jonsbo V4 which is available for around 60-65€ but I would like to get some other recommendations.

I'm not too concerned about cooling since the Hardware I'm using isn't that power hungry.

Thermaltake Core V21

Fractal Design Node 304

[GrayTech]

17 minutes ago, Helly Benchmarking said:

Thermaltake Core V21

Fractal Design Node 304

Thanks for your recommendations! I don't really like the look of the Core V21. The Node 304 seems like a good choice but sadly it's only ITX. 

[fonzz1e]

18 hours ago, GrayTech said:

Thanks for your recommendations! I don't really like the look of the Core V21. The Node 304 seems like a good choice but sadly it's only ITX. 

• silverstone fara series (i'm personally using silverstone tj08-e as my unraid with six 3.5 HDD)
• coolermaster nr400 (not sure if your country can find those without ODD)
• montech air 100 lite matx
• phanteks evolv matx (nice but out of your budget)

[tkitch]

If you're trying to be portable:
https://www.sliger.com/products/cases/cerberus/

 

[GrayTech]

@fonzz1e @tkitch Thanks for your recommendations!

 

I also did some more research by myself. The Inter Tech IM-1 Pocket (also sold as Tecware Fusion/SAMA IM01) seems to be exactly what I was looking for.

[fonzz1e]

9 hours ago, GrayTech said:

@fonzz1e @tkitch Thanks for your recommendations!

 

I also did some more research by myself. The Inter Tech IM-1 Pocket (also sold as Tecware Fusion/SAMA IM01) seems to be exactly what I was looking for.

that works too

 

if yer using non-sfx psu, it's gonna be tight

[GrayTech]

12 hours ago, fonzz1e said:

that works too

 

if yer using non-sfx psu, it's gonna be tight

I'll try using my existing ATX PSU. I guess it'll be fine since my GPU is short enough to fit with an ATX PSU installed.

[mapegl]

If you need pointers on the Intertech IM 1, shoot. I got it with an ATX PSU and I have tried inverted and regular setup. 

On 11/21/2021 at 2:20 PM, GrayTech said:

I would like to build a small formfactor PC for travelling with hardware I already have at home. Therefore I'm looking for a small case which can handle a mATX motherboard, two slot GPU (200mm) and an ATX PSU. Price should be less then 100€ (GER). Currently I'm looking at the Jonsbo V4 which is available for around 60-65€ but I would like to get some other recommendations.

I'm not too concerned about cooling since the Hardware I'm using isn't that power hungry.

 

[geo3]

I have this one. And it's surprisingly well built for how cheap it is.   https://www.newegg.com/p/N82E16811197012