Jump to content

Is the GPU inserted?

Go to solution Solved by Mavendow,
20 minutes ago, Nex6 said:

Solved for now. I wanted to test whether Radeon caption would show with card being unplugged from power. And as expected, it did, but MB showed also VGA error. Ok, so motherboard did see the card. I plugged the power back in, turned the PC on... and it works now. So basically unplugging power from the card, turning on-off and plugging power back in. The power was the first thing I checked and it was definitely plugged in alright. That's what concerns me a bit, but ok...

That's very weird, but consistent with phantom power. Turning on components without the power connected is standard practice for clearing out such problems. That's why techs often tell end users to unplug their router or whatever isn't working. But it's not normal on a PC since they have a PSU to presumably clean incoming power. I would check whether you have a ground fault somewhere in the PC, power strip, or wall socket.

In or Out?  

3 members have voted

  1. 1. In or Out?

    • In
    • Out
      0
    • Inconclusive
      0


I have the dreadful no HDMI signal coming to any monitor from my PC. The computer seems to be running just fine (although of course I can't see anything), and HDMI cable and the monitors are fine, as they work with my laptop. I tried display port and my usual HDMI port, no luck.

 

The relevant hardware is:

6900XT, watercooled

MSI Godlike X570

 

I'm attaching a photo of the GPU connection and I can't decide whether it's in or out. I know that some people will think I'm just lazy, but... it's REALLY painful to get in there with all that water cooling hardware. Also, the computer has been working fine for 5 months till today, and there was no movement of the case between yesterday and today when I woke up. I thought it was impossible for GPU to come out on its own?

 

If the consensus is that it's out, with my experience with watercooling, it's probably going to take me 2 days to get in and reinsert the GPU. Anyone has an idea what's the easiest way to do it? I tried to push in, but it doesn't move into that direction (it moves a bit if I try to pull out)

 

There is no way for me to check (through some motherboard tool?) whether GPU is inserted or not?

 

 

20211118_230320.jpg

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/
Share on other sites

Link to post
Share on other sites

if it worked before, I would check for card sag first

 

eab3f9a8bb9472ea1069e8af1fa2dcd9_XL.jpg

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/#findComment-15110091
Share on other sites

Link to post
Share on other sites

30 minutes ago, Jurrunio said:

if it worked before, I would check for card sag first

 

eab3f9a8bb9472ea1069e8af1fa2dcd9_XL.jpg

I've tried handling it in different ways to see if there is some kind of contact issue between PCI and the card, but nothing helped.

I see RADEON blinking at the bottom plate, but I assume it would blink even without it being inserted (anyone knows?) because it's connected to the LED hub. The cooling capacity is too high for it to get warm during idle so I'm not even sure if it's working or not. The plate is almost cold.

 

If it really is "in" and the contact is fine, what else is there? Card dead?

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/#findComment-15110112
Share on other sites

Link to post
Share on other sites

33 minutes ago, Nex6 said:

, what else is there? Card dead?

not always fully dead, but partially dead such as the display outputs.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/#findComment-15110159
Share on other sites

Link to post
Share on other sites

Solved for now. I wanted to test whether Radeon caption would show with card being unplugged from power. And as expected, it did, but MB showed also VGA error. Ok, so motherboard did see the card. I plugged the power back in, turned the PC on... and it works now. So basically unplugging power from the card, turning on-off and plugging power back in. The power was the first thing I checked and it was definitely plugged in alright. That's what concerns me a bit, but ok...

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/#findComment-15110177
Share on other sites

Link to post
Share on other sites

20 minutes ago, Nex6 said:

Solved for now. I wanted to test whether Radeon caption would show with card being unplugged from power. And as expected, it did, but MB showed also VGA error. Ok, so motherboard did see the card. I plugged the power back in, turned the PC on... and it works now. So basically unplugging power from the card, turning on-off and plugging power back in. The power was the first thing I checked and it was definitely plugged in alright. That's what concerns me a bit, but ok...

That's very weird, but consistent with phantom power. Turning on components without the power connected is standard practice for clearing out such problems. That's why techs often tell end users to unplug their router or whatever isn't working. But it's not normal on a PC since they have a PSU to presumably clean incoming power. I would check whether you have a ground fault somewhere in the PC, power strip, or wall socket.

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/#findComment-15110210
Share on other sites

Link to post
Share on other sites

9 minutes ago, Mavendow said:

That's very weird, but consistent with phantom power. Turning on components without the power connected is standard practice for clearing out such problems. That's why techs often tell end users to unplug their router or whatever isn't working. But it's not normal on a PC since they have a PSU to presumably clean incoming power. I would check whether you have a ground fault somewhere in the PC, power strip, or wall socket.

Thanks, good point. I am planning to clean up the power situation a bit by connecting it through a quality UPS and then go from there. Quality of electricity in my place is definitely not great.

Link to comment
https://linustechtips.com/topic/1389479-is-the-gpu-inserted/#findComment-15110219
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×