ARGB

[Deepak Parkar]

Is there any chance I can Use ARGB components Without dedicated ARGB header ?

[Levent]

with a argb controller, yes.

[Deepak Parkar]

25 minutes ago, Levent said:

with a argb controller, yes.

which Port Argb Controllers Use?

[Deepak Parkar]

Can i use cooler master ARGB controller without ARGB header To control ARGB Stuffs

[Deepak Parkar]

Can i use nzxt Led Strips In Cooler master Wires RGB controller C10L 3 ???

[FRD]

25 minutes ago, Deepak Parkar said:

Can i use cooler master ARGB controller without ARGB header To control ARGB Stuffs

Yes, it should be possible. Which controller are you looking at? All ARGB will be controlled by the controller, not motherboard.

23 minutes ago, Deepak Parkar said:

Can i use nzxt Led Strips In Cooler master Wires RGB controller C10L 3 ???

No, I believe NZXT is not compatible with CM, unless they use the same connectors. NZXT's RGB uses their own system I believe.

[Kilrah]

32 minutes ago, Deepak Parkar said:

which Port Argb Controllers Use?

They typically connect to a front panel USB header.

[Deepak Parkar]

Okay Lastly Tell me I have 5 ARGB Fans And Can I Use An Argb Hub To Connect All Fan And Then Connect To ARGB header Of the motherboard. After that Will i able To Control Argb By Software Or Motherboard?? 

I m Sorry I am spamming To Much Like an Idiot.

[Inelastic]

5 hours ago, Deepak Parkar said:

Okay Lastly Tell me I have 5 ARGB Fans And Can I Use An Argb Hub To Connect All Fan And Then Connect To ARGB header Of the motherboard. After that Will i able To Control Argb By Software Or Motherboard?? 

I m Sorry I am spamming To Much Like an Idiot.

In theory, yes. It really depends on the controller. For example, I have Thermaltake fans connected to a TT Sync controller. That controller is sold specifically to do that. https://www.thermaltakeusa.com/tt-sync-controller-tt-premium-edition.html

 

The fans have to be able to be supported by the controller. Many companies will make their own proprietary connections for their fans. Both Corsair and NZXT make proprietary fan connections, both of which are 4 pins where the 4th pin is a data return to chain fans together. However, I don't believe that their fans are cross-compatible, as in you can't put a Corsair fan on a NZXT controller even though you may be able to plug it in. The hub also has to have a connection to allow it to connect to a mobo argb header.

[Deepak Parkar]

1 hour ago, Inelastic said:

In theory, yes. It really depends on the controller. For example, I have Thermaltake fans connected to a TT Sync controller. That controller is sold specifically to do that. https://www.thermaltakeusa.com/tt-sync-controller-tt-premium-edition.html

 

The fans have to be able to be supported by the controller. Many companies will make their own proprietary connections for their fans. Both Corsair and NZXT make proprietary fan connections, both of which are 4 pins where the 4th pin is a data return to chain fans together. However, I don't believe that their fans are cross-compatible, as in you can't put a Corsair fan on a NZXT controller even though you may be able to plug it in. The hub also has to have a connection to allow it to connect to a mobo argb header.

Okay Thanks. I think i can go with 10 ports Hub For 5 fans and Msi Aio fans. I am Not Going Fot controller Just A hub To Connect Multiple argb Stuffs to motherboard And Manage it a little bit not too much though. And If I'll be Able To Control It By This Then I'll Be Using This only.