No Power after BIOS update

[HardwarePotato]

Hi,

I reinstalled my Windows and thougt it is a good idea to update my BIOS for the fresh system. Sadly now my PC does not power on.

Then I press the Power Button for a few seconds RGB goes on shortly, only to then go of again.

I already tried reseting the BIOS by removing the battery and shorting the clear CMOS.

The board is a MSI MPG Z390 GAMING PRO CARBON.

ANY Techtipps?

[kelvinhall05]

This is why you never update the BIOS unless you absolutely have to. You probably fucked it up somehow and will need to replace the BIOS chip or motherboard if you aren't capable of that.

[DoctorNick]

14 minutes ago, kelvinhall05 said:

This is why you never update the BIOS unless you absolutely have to. You probably fucked it up somehow and will need to replace the BIOS chip or motherboard if you aren't capable of that.

You can flash a bios chip with a USB bios flasher like this: 

 

[SorryBella]

29 minutes ago, HardwarePotato said:

Then I press the Power Button for a few seconds RGB goes on shortly, only to then go of again.

Thats a bricked BIOS indeed, and from what i can tell i cant see any means to flashback nor a 2nd chip you can activate. The best thing you could do is going to be sending the board to MSI for an RMA, and hope that they dont sniff human error. But i know someone here can provide a hacky thing that might work, but probably not.

[BetteBalterZen]

F

[kelvinhall05]

1 hour ago, DoctorNick said:

You can flash a bios chip with a USB bios flasher like this: 

 

If OP can't flash through the BIOS I don't trust them to flash it like this.