Jump to content

RTX 3070 Vision OC holding steady 1920 MHz

kosio96

Hello guys. I recently bought gigabyte rtx 3070 vision oc. I checked in a couptle of sites and they say that its boost clock is 1825 MHz. While gaming /playing AC origins/ mine holds steady 1920 mhz.

I haven't overclocked it. Should I be worried? Can something happen to it? Also in AC origins it holds around 75 degrees, but I think that is because of my case poor air stream /kolink observatory/. When I remove the front glass the temps fall to about 66 degrees. So should that clock speed worrie me and is 75 degrees too high?

Screenshot_1.png

Link to comment
Share on other sites

Link to post
Share on other sites

Nothing to worry about. 75C is a perfectly fine GPU temp, so your card is automatically clocking up to get the most performance possible. Cases with tempered glass front panels typically don't have the best airflow, but at your temps I wouldn't be concerned. 

Main PC:

AMD Ryzen 7 5800X • Noctua NH-D15 • MSI MAG B550 Tomahawk • 2x8GB G.skill Trident Z Neo 3600MHz CL16 • MSI VENTUS 3X GeForce RTX 3070 OC • Samsung 970 Evo 1TB • Samsung 860 Evo 1TB • Cosair iCUE 465X RGB • Corsair RMx 750W (White)

 

Peripherals/Other:

ASUS VG27AQ • G PRO K/DA • G502 Hero K/DA • G733 K/DA • G840 K/DA • Oculus Quest 2 • Nintendo Switch (Rev. 2)

 

Laptop (Dell XPS 13):

Intel Core i7-1195G7 • Intel Iris Xe Graphics • 16GB LPDDR4x 4267MHz • 512GB M.2 PCIe NVMe SSD • 13.4" OLED 3.5K InfinityEdge Display (3456x2160, 400nit, touch). 

 

Got any questions about my system or peripherals? Feel free to tag me (@bellabichon) and I'll be happy to give you my two cents. 

 

PSA: Posting a PCPartPicker list with no explanation isn't helpful for first-time builders :)

Link to comment
Share on other sites

Link to post
Share on other sites

Don't worry, i have a gigabyte RTX 3070 Gaming OC and it is just fine.
You should however try to get a better airflow. i don't let my GPU go above 70° as a precaution

Capture d’écran 2021-04-21 024256.png

Link to comment
Share on other sites

Link to post
Share on other sites

That's normal for GPU boost, but temps are a bit high,  if you're worried you can just lower core clock a bit (-50 / -100)

 

Here's mine with custom voltage curve (which means lower voltage, higher clocks,  and lower temps in this case)

Max temps are usually around 61-62C, but mostly it stays under 60C 

 

3070_hvn_5qjaa.thumb.jpg.53760c27ced207cc0c82760969c4fb21.jpg

The direction tells you... the direction

-Scott Manley, 2021

 

Softwares used:

Corsair Link (Anime Edition) 

MSI Afterburner 

OpenRGB

Lively Wallpaper 

OBS Studio

Shutter Encoder

Avidemux

FSResizer

Audacity 

VLC

WMP

GIMP

HWiNFO64

Paint

3D Paint

GitHub Desktop 

Superposition 

Prime95

Aida64

GPUZ

CPUZ

Generic Logviewer

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Completely normal. Modern Gpus basically "auto overclock" themselves it under the thermal and power limit.

 

Also 75C is fine, but somewhat high. 

 

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to comment
Share on other sites

Link to post
Share on other sites

Thank you all for the replies. For now the temps don't bother me that much. When the weather gets warmer and the room temperature goes up I'll probably remove the front glass.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×