Jump to content

2080ti ftw3

Ebony Falcon
By Ebony Falcon
in Graphics Cards
 Share
Posted
  • Author
19 minutes ago, rodarkone said:

What temperatures do you see the card running at ? .. most likely the fans are kicking in only when the board is hot (>50-60C) in PX1 you also have ICX did you checked the sensors ? Is the card ramping down performance ? 

Yeah it gets to 85c and starts downclocking 

so I can enable the custom profile and it works fine but ffs default it shouldn’t do this 

-14900kf

- 4000 32gb ram 

-4070ti super duper 

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085099
Share on other sites
Link to post
Share on other sites
Posted

if its anything like my 1080ti ftw3 each of the 3 fans is tied to a different temperature sensor on the pcb, one for core temp, one for memory temp, and one for vrm temp. if you try and do anything in msi afterburner regarding the fan curve it only has control over the core temp fan. seems weird that it downclocks and all that under the default fan profile but if a custom profile works then it works

topics i need help on:

Spoiler

 

 

my "oops i bought intel right before zen 3 releases" build

CPU: Ryzen 5 3600 (placeholder)

GPU: Gigabyte 980ti Xtreme (also placeholder), deshroud w/ generic 1200rpm 120mm fans x2, stock bios 130% power, no voltage offset: +70 core +400 mem 

Memory: 2x16gb GSkill Trident Z RGB 3600C16, 14-15-30-288@1.45v

Motherboard: Asus ROG Strix X570-E Gaming

Cooler: Noctua NH-D15S w/ white chromax bling
OS Drive: Samsung PM981 1tb (OEM 970 Evo)

Storage Drive: XPG SX8200 Pro 2tb

Backup Storage: Seagate Barracuda Compute 4TB

PSU: Seasonic Prime Ultra Titanium 750W w/ black/white Cablemod extensions
Case: Fractal Design Meshify C Dark (to be replaced with a good case shortly)

basically everything was bought used off of reddit or here, only new component was the case. absolutely nutty deals for some of these parts, ill have to tally it all up once it's "done" :D 

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085103
Share on other sites
Link to post
Share on other sites
Posted
37 minutes ago, Ebony Falcon said:

If I don’t set custom fan profile in px1 only one fan spins even under full load 

is that normal ? 

Currenty I have a Strix card, but prior to that I had 2 EVGAs. All fans would always spin when temps rised during gameplay in all cards.

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085116
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, Ebony Falcon said:

Yeah it gets to 85c and starts downclocking 

so I can enable the custom profile and it works fine but ffs default it shouldn’t do this 

you can try a fresh windows / driver install - and see if is a software issue - if not .. RMA it :) 

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085236
Share on other sites
Link to post
Share on other sites
Posted
23 minutes ago, Ebony Falcon said:

Card is second hand I don’t no if evga transfer warrenty ?

 

Flip it to the OC BIOS... Switch on the top of the card.

 

The fans will spin all the time then.

 

Also make sure you have the latest X1 installed, then click upgrade to make sure it is.

i9 9900K @ 5.0 GHz, NH D15, 32 GB DDR4 3200 GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q 27", Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W Titanium. 

 

i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV DDR4 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W.

 

i7 8700K, AORUS Z370 Ultra Gaming, 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.

 

 

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085291
Share on other sites
Link to post
Share on other sites
Posted

I have FTW3 Ultras. All the fans should come on at 55c.

This is strange since the first down clock is a 54c

 

If the fans are not coming on post on the EVGA forum. It may be a known issue.

 

Also it my be a PX1 bug. I have 2 FTW3 Ultra setups. On one the #1 fan was running and the rest ran then the GPU hit 55c. The other had all three fans running at idle but when I switched on PX1, 2 fans stopped. Strange stuff.

 

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085470
Share on other sites
Link to post
Share on other sites
Posted
13 minutes ago, jones177 said:

I have FTW3 Ultras. All the fans should come on at 55c.

This is strange since the first down clock is a 54c

 

If the fans are not coming on post on the EVGA forum. It may be a known issue.

 

Also it my be a PX1 bug. I have 2 FTW3 Ultra setups. On one the #1 fan was running and the rest ran then the GPU hit 55c. The other had all three fans running at idle but when I switched on PX1, 2 fans stopped. Strange stuff.

 

 

Sometimes you have to reboot and or shut down X1 and restart it, then it will see all the fans etc.

i9 9900K @ 5.0 GHz, NH D15, 32 GB DDR4 3200 GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q 27", Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W Titanium. 

 

i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV DDR4 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W.

 

i7 8700K, AORUS Z370 Ultra Gaming, 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.

 

 

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14085502
Share on other sites
Link to post
Share on other sites
Posted
8 hours ago, Ankerson said:

 

Sometimes you have to reboot and or shut down X1 and restart it, then it will see all the fans etc.

Yes.

Sometimes it only shows 2 fans. 

 

RIG#1 CPU: AMD, R 7 5800x3D| Motherboard: X570 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX500 2.5" 2TB | Monitor: ASUS ROG Swift PG42UQ

 

RIG#2 CPU: Intel i9 11900k | Motherboard: Z590 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 3600 | GPU: EVGA FTW3 ULTRA  RTX 3090 ti | PSU: EVGA 1300 G+ | Case: Lian Li O11 Dynamic EVO | Cooler: Noctua NH-D15 | SSD#1: SSD#1: Corsair MP600 1TB | SSD#2: Crucial MX300 2.5" 1TB | Monitor: LG 55" 4k C1 OLED TV

 

RIG#3 CPU: Intel i9 10900kf | Motherboard: Z490 AORUS Master | RAM: Corsair Vengeance RGB Pro 32GB DDR4 4000 | GPU: MSI Gaming X Trio 3090 | PSU: EVGA 1000 G+ | Case: Lian Li O11 Dynamic | Cooler: EK 360mm AIO | SSD#1: Crucial P1 1TB | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

 

RIG#4 CPU: Intel i9 13900k | Motherboard: AORUS Z790 Master | RAM: Corsair Dominator RGB 32GB DDR5 6200 | GPU: Zotac Amp Extreme 4090  | PSU: EVGA 1000 G+ | Case: Streacom BC1.1S | Cooler: EK 360mm AIO | SSD: Corsair MP600 1TB  | SSD#2: Crucial MX500 2.5" 1TB | Monitor: LG 55" 4k B9 OLED TV

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14086522
Share on other sites
Link to post
Share on other sites
Posted
18 minutes ago, jones177 said:

Yes.

Sometimes it only shows 2 fans. 

 

 

Yeah, usually after a driver update or Windows update or something.

 

Then reboot and they are all there again.

i9 9900K @ 5.0 GHz, NH D15, 32 GB DDR4 3200 GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q 27", Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W Titanium. 

 

i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV DDR4 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W.

 

i7 8700K, AORUS Z370 Ultra Gaming, 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.

 

 

Link to comment
https://linustechtips.com/topic/1254119-2080ti-ftw3/#findComment-14086548
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×