I am sick of my pc hard/soft reseting/freezeing all the time. Help, please.

[Didrik]

Hi, I am sick of my pc hard/soft reseting/freezeing like between 5-300min ca of use. I think its my 6 year old psu becuse thats the only vital component I havent replaced.

 

Its not overheating

Not overclocked

Tryed XMP on and off

Same after a re install of windows. And tryed linux, still same.

Reseted ram.

Checked all powercabels internal and external.

What do you guys think?

My specs is in my signature below.

[mmilamam]

do not open the psu but have a look at the back. mabey buy a new one yes

[LIGISTX]

Have you tried to update the BIOS? A lot of older Ryzen mobo’s BIOS was, well, not great. I’d start there...

[Didrik]

1 minute ago, LIGISTX said:

Have you tried to update the BIOS? A lot of older Ryzen mobo’s BIOS was, well, not great. I’d start there...

Yes, i am running the latest bios

[mmilamam]

2 minutes ago, KURPz said:

Yes, i am running the latest bios

it is an shitty psu. caps over heating

[Didrik]

1 minute ago, mmilamam said:

it is an shitty psu. caps over heating

Its kinda not. It was a mid-high end psu from 2013 ish

[Didrik]

I have the XXX edition

[PorkishPig]

2 minutes ago, KURPz said:

Its kinda not. It was a mid-high end psu from 2013 ish

Yep, your PSU is fine, it's in Tier A on the PSU tier list.

Check that your XMP profile is set to 15-16-16-35.

[Didrik]

7 minutes ago, PorkishPig said:

Yep, your PSU is fine, it's in Tier A on the PSU tier list.

Check that your XMP profile is set to 15-16-16-35.

Will try

[Didrik]

@PorkishPigBooted with 15 16 16 16 35 timings and everything semes fine. Any ram stress tests you recomend? To test the stability.

[PorkishPig]

Just now, KURPz said:

@PorkishPigBooted with 15 16 16 16 35 timings and everything semes fine. Any ram stress tests you recomend? To test the stability.

Nothing that you can run within Windows. You can try running Windows Memory Diagnostic (Win+R, enter mdsched.exe) if you'd like, but it may not give you what you're looking for.

[Didrik]

@PorkishPigwell it dosent look good so far

[PorkishPig]

11 minutes ago, KURPz said:

@PorkishPigwell it dosent look good so far

Yep, that's not good. Looks like you have bad memory. You will likely need to replace at least one module, but wait for the test to conclude before doing anything.

[Parideboy]

45 minutes ago, KURPz said:

I have the XXX edition

Good choice. I had the no xxx one, not really that good.

11 minutes ago, KURPz said:

@PorkishPigwell it dosent look good so far

You'll need to test each module individually. If they all show no errors, there might be a problem with the dual channel on your board

[Didrik]

36 minutes ago, PorkishPig said:

Yep, that's not good. Looks like you have bad memory. You will likely need to replace at least one module, but wait for the test to conclude before doing anything.

I will test each module tomorrow

Its late rn and it works kinda. like no artifacting

[Didrik]

Any ways thanks for helping me. Every thing has still a warranty so i will just RMA it.

Have a good day/morning/evening/night.

@Parideboy@PorkishPig