Jump to content

How do i connect these fans properly?

Go to solution Solved by Hairless Monkey Boy,
1 minute ago, JellyBurger676 said:

@HairlessMonkeyBoy

Hi thanks for your reply. 

So which connectors should I use? Only daisy chain and plug into rgb header? Will the fans get any power to spin or will this only be for the rgb? 

You need to use both types on connectors. In your picture, the two on the left are female/male RGB, and the one on the right is for PWM fan control.

 

Hi guys would like to say I'm a complete noob at pc building. 

So I purchased a pack of 5 these deepcool 120mm fans. - I have attached photos of instruction and fans. 

They have rgb which I want to utilise. 

HOWEVER they have 3 connectors coming of each fan and I'm not sure if I know exactly what I'm doing so I want to ask how am I to connect 5 of these. 

Do I have to user all the connectors - is the daisy chain only used to connect them all to rgb and the other one to plug into the hub - do I need to use the hub or can I also just plug the fans straight into mobo or use some splitters? 

 

Thanks 🙂

IMG_20200811_130722.jpg

IMG_20200811_130735.jpg

IMG_20200811_130919.jpg

IMG_20200811_131111.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, JellyBurger676 said:

Do I have to user all the connectors

No.

8 minutes ago, JellyBurger676 said:

is the daisy chain only used to connect them all to rgb and the other one to plug into the hub

Yes.

8 minutes ago, JellyBurger676 said:

do I need to use the hub

No.

8 minutes ago, JellyBurger676 said:

can I also just plug the fans straight into mobo or use some splitters?

Yes.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, HairlessMonkeyBoy said:

No.

Yes.

No.

Yes.

@HairlessMonkeyBoy

Hi thanks for your reply. 

So which connectors should I use? Only daisy chain and plug into rgb header? Will the fans get any power to spin or will this only be for the rgb? 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, JellyBurger676 said:

@HairlessMonkeyBoy

Hi thanks for your reply. 

So which connectors should I use? Only daisy chain and plug into rgb header? Will the fans get any power to spin or will this only be for the rgb? 

You need to use both types on connectors. In your picture, the two on the left are female/male RGB, and the one on the right is for PWM fan control.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

@HairlessMonkeyBoy

Oh so I daisy chain the male/female connectors. (using the 2 on left of each fan apart from the first fan). 

Then I use the 3rd and last connector (on the right of photo) and plug this in mobo or fanhub then mobo itself? 

 

Sorry if these questions are dumb. 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×