Jump to content

GPU FIX

xDBx
By xDBx
in Graphics Cards
 Share
Posted

here's my problem: Gpu Sapphire rx 580, shit card, built very cheap, overheats very fast. well, I need it to work again. So after new Themalpaste and pads, it was running, but the Temp sensors were wrong, (checked with a heat gun, and SpeedFan, GPU-z. Adrenalin update didn't fix it, the GPU was giving wrong Temps! so I decided to change bios to OC Bios(Dual Bios GPU). so then It really ran in Heaven Benchmark 4.0 in 5 minutes over 100 Degrees CElsius, but my fans where spinning like hell. here's my problem: Gpu Sapphire rx 580, shit card, built very cheap, overheats very fast. well, I need it to work again. So after new Themalpaste and pads, it was running, but the Temp sensors were wrong, (checked with heat gun, and SpeedFan, GPU-z. Adrenalin update didn't fix it, the GPU was giving wrong Temps! so I decided to change bios to OC Bios(Dual Bios GPU). so then It really ran in Heaven Benchmark 4.0 in 5 minutes over 100 Degrees CElsius, but my fans where spinning like hell. ( because of Temps), and watts consumption where low, so I checked with heat gun, and my REAL TEPMS were like 55C. so I needed to Bios update my GPU clearly!!! from there everything went bad, NOW my card doesn't get detected by BIOS or any Program. and when I change PCI-E slots, the Mainboard doesn't run power to that slot. so what shall I do?

Link to comment
https://linustechtips.com/topic/1229901-gpu-fix/
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, xDBx said:

Gpu Sapphire rx 580, shit card, built very cheap, overheats very fast

sapphire is one of the best... rx 580 offers better performance than 1060 and matches gtx 1660...

5 minutes ago, xDBx said:

So after new Themalpaste and pads, it was running, but the Temp sensores wher wrong,

probably you installed too big thermalpads. my sapphire rx 58+ pulse runs around 65c on full load. Not a shit card, very good card. isnt built very cheap. it is built fairly well. Overheating is probably case airflow issue.

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1229901-gpu-fix/#findComment-13885254
Share on other sites
Link to post
Share on other sites
Posted
Just now, xDBx said:

ok, ok. the Card is great!! but how do I fix my situation?

you probalby broke some sensors. no big deal thought. Just run some bencmark for 1 hour and check the temps. now that you know the max temp just make a custom curve with msi afterburner. 

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1229901-gpu-fix/#findComment-13885257
Share on other sites
Link to post
Share on other sites
Posted
10 hours ago, xDBx said:

yes I know, but how can I get my card running again, when the card doesent even get detected by the mainboard, and it doesnt send any power the the card..because it doent see it.

 

Which model is it? The nitro has a dual bios. Is there a bios switch?

Link to comment
https://linustechtips.com/topic/1229901-gpu-fix/#findComment-13886928
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×