Problems with my gpu fans

[probablydumb]

Alright so im making this post since recently i put on a custom fan curve and my gpu doesn't wanna understand that it has to go at 0% fans under 60c and still goes at 15%.And in GPU-Z i see the rpm change from 1000rpm to 0rpm then back to 1000rpm and im kinda worried since it all worked before i transported my pc in another city.And whenever i want to manually change temperature in msi afterburner lets say i set it to 50% it automatically goes back to 15%

PC Specs
Case:NJOY Vanguard with custom RGB Fans
Processor: AMD Ryzen 5 3600X (4.4GHZ)
Graphics Card: MSI GAMING X TRIO RTX 2080S (8GB DDR6)
RAM: 16GB (15.96 Usable) Corsair Vengeance RGB PRO
Power Supply: Corsair CX750 (750W)
HDD: 1 TB WD Blue
SSD: 240GB Kingston A400
Motherboard: ASUS TUF B450M PLUS GAMING

 

[Bombastinator]

When you say it all worked before you were able to do this zero rpm thing with the software you were using before transport but not after?

[probablydumb]

2 hours ago, Bombastinator said:

When you say it all worked before you were able to do this zero rpm thing with the software you were using before transport but not after?

Thanks for the reply i fixed it.It was interfering with the msi dragon center program