New PC build wont POST

[rick.davenport]

ASUS H310M R2 (new)

INTEL I7 7700t (used, known good)

HYPERX Fury 16gb RAM (2X8) (new)

EVGA 500W psu (new)

Samsung m.2 sata 256gb ssd (used known good)

Deepcool GAMMAX fan (new)

Gigabyte RTX 2070 (new)

 

So this is my first time building a rig in a LONG time. I have everything mounted and plugged in, the LEDs turn on the motherboard, and when I hit the power button, the light on the fan turns on and tirns back off after about 2 seconds. No post, nothing other than a spin up from the fan and then immediately back off. 

 

I was thinking that the motherboard was the wrong type, even though the socket is correct, but asus website is kind of crap and their customer service, at least via email, was less than helpful. Any advice is greatly appreciated. 

[Noob872]

You probably have to do a bios update, which would mean going on the asus website 

 

[bmx6454]

6 minutes ago, rick.davenport said:

I was thinking that the motherboard was the wrong type

that would be the issue, your cpu isn't on the support list. 300 series is for 8th-9th gen only. not 6th-7th.

[Noob872]

https://www.asus.com/Motherboards/PRIME-H310M-K-R2-0/HelpDesk_Download/

 

[rick.davenport]

27 minutes ago, bmx6454 said:

that would be the issue, your cpu isn't on the support list. 300 series is for 8th-9th gen only. not 6th-7th.

So that is the expected outcome... thanks for confirming. I appreciate it

[bmx6454]

3 minutes ago, rick.davenport said:

So that is the expected outcome... thanks for confirming. I appreciate it

np, good luck with the rest of the build.