Jump to content

I have a Gigabyte Vega 56 Gaming OC (the non reference one), and from what I've gathered, when undervolted, it can preform better (and run cooler). I've overclocked a bit, but am still new.  

How would I go about this? And is there anything that I would need to know

If you've undervolted this card, what were your results?

 

Either @piratemonkey or quote me when responding to me

Link to comment
https://linustechtips.com/topic/1206560-undervolting/
Share on other sites

Link to post
Share on other sites

1 hour ago, piratemonkey said:

I have a Gigabyte Vega 56 Gaming OC (the non reference one), and from what I've gathered, when undervolted, it can preform better (and run cooler). I've overclocked a bit, but am still new.  

How would I go about this? And is there anything that I would need to know

If you've undervolted this card, what were your results?

 

Each card will have a different stable undervolt -- part of the silicon lottery.

What is the stock GPU Core voltage on your card now?

How much have you overclocked it by at this point (Factory vs OC frequency) ?

AMD Ryzen 9000 Rig

  • AMD R7 9800X3D + Alphacool CORE 1 w/ Performance Mount Kit + Thermal Grizzly AM5 Contact Frame
  • Gigabyte X870E Aorus Pro Ice
  • 32GB (16GB X2) G.Skill Trident Z5 Neo RGB DDR5-6400
  • Sapphire NITRO+ 6800 XT Special Edition + EKwb Full Cover Block
  • Custom Loop w/ 2x 360mm Radiators
  • WD SN850X + WD SN750 + Samsung 980
  • EVGA P2 850W + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL

AMD Ryzen 5000 Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel i7-8086K / Z390 Rig (Decommissioned Q2' 2025)

Intel i7-6800K / X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)
Intel i5-4690K / Z97 Rig (Decommissioned)

AMD FX-8350 / 990FX Rig (Decommissioned)

AMD Phenom II X6 1090T / 890FX Rig (Decommissioned)

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
https://linustechtips.com/topic/1206560-undervolting/#findComment-13695803
Share on other sites

Link to post
Share on other sites

3 minutes ago, -rascal- said:

Each card will have a different stable undervolt -- part of the silicon lottery.

I know, I'm not that big of a noob (it's nice to know what others got, so I can work off of that)

 

7 minutes ago, -rascal- said:

What is the stock GPU Core voltage on your card now?

How much have you overclocked it by at this point (Factory vs OC frequency)

1580325975_gpuvoltage.PNG.69c2e222c80d842acdcb72814227cf33.PNG

 

That's what the Radeon software reports. I have it at stock right now (could never get it stable)

 

Either @piratemonkey or quote me when responding to me

Link to comment
https://linustechtips.com/topic/1206560-undervolting/#findComment-13695818
Share on other sites

Link to post
Share on other sites

10 minutes ago, piratemonkey said:

I know, I'm not that big of a noob (it's nice to know what others got, so I can work off of that)

 

1580325975_gpuvoltage.PNG.69c2e222c80d842acdcb72814227cf33.PNG

 

That's what the Radeon software reports. I have it at stock right now (could never get it stable)

 

State 7 is using max voltage Radeon Software will allow (1200 mV).

You can try tuning the voltage for State6 and State7 -- start with State7 first.

 

Try 1175mV, then 1150mV.

If your computer crashes, or gets BSoD (e.g. Video_TRD_Failure is one of them), then the voltage is too low, or overclock is unstable.

AMD Ryzen 9000 Rig

  • AMD R7 9800X3D + Alphacool CORE 1 w/ Performance Mount Kit + Thermal Grizzly AM5 Contact Frame
  • Gigabyte X870E Aorus Pro Ice
  • 32GB (16GB X2) G.Skill Trident Z5 Neo RGB DDR5-6400
  • Sapphire NITRO+ 6800 XT Special Edition + EKwb Full Cover Block
  • Custom Loop w/ 2x 360mm Radiators
  • WD SN850X + WD SN750 + Samsung 980
  • EVGA P2 850W + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL

AMD Ryzen 5000 Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel i7-8086K / Z390 Rig (Decommissioned Q2' 2025)

Intel i7-6800K / X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)
Intel i5-4690K / Z97 Rig (Decommissioned)

AMD FX-8350 / 990FX Rig (Decommissioned)

AMD Phenom II X6 1090T / 890FX Rig (Decommissioned)

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
https://linustechtips.com/topic/1206560-undervolting/#findComment-13695849
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×