GPU?

[Hendricks3]

i been noticing that my pc after some upgrades performance has been subpar and not great most of the time, i had a r5 2600 and a gtx 1080 upgraded to r5 3600 and a 5700xt and i been getting some weird performance issues where if i boot it up and i dont wait at least 10 min after getting into windows i get weird fps drops randomly, anyone knows as to why and how to fix it?

[Stahlmann]

Did you do a fresh install of windows after switching GPU brands?

If not, I'd recommend it because you can get all kinds of weird issues if you dont.

[Hendricks3]

Just now, Stahlmann98 said:

Did you do a fresh install of windows after switching GPU brands?

If not, I'd recommend it because you can get all kinds of weird issues if you dont.

no all i did beforehand was use ddu, is that not recommended?

 

[boggy77]

update bios? make sure you don't have the same bios settings and overclocks applied from when you had the 2600.

[Hendricks3]

2 minutes ago, boggy77 said:

update bios? make sure you don't have the same bios settings and overclocks applied from when you had the 2600.

never overclocked my 2600 i just have my vcore and ram voltage and cpu voltage set to x amount as a saw somewhere is was better. aslo latest bios

 

 

[boggy77]

5 minutes ago, Hendricks3 said:

cpu voltage set to x amount

that's most likely what's causing instability

[boggy77]

5 minutes ago, Hendricks3 said:

i just have my vcore and ram voltage and cpu voltage set to x amount

literally the definition of overclocking

[Hendricks3]

Just now, boggy77 said:

that's most likely what's causing instability

so do you suggest restore it to default?

[boggy77]

Just now, Hendricks3 said:

so do you suggest restore it to default?

yes

[boggy77]

1 minute ago, Hendricks3 said:

so do you suggest restore it to default?

restore to default and just enable xmp so the ram runs at the rated speed. no need to change voltages

also make sure ram is in slots 2 and 4.

 

jsut curious, what voltages did you apply?

[Hendricks3]

Just now, boggy77 said:

yes

kk will try and report back brother

 

[Hendricks3]

1 minute ago, boggy77 said:

restore to default and just enable xmp so the ram runs at the rated speed. no need to change voltages

also make sure ram is in slots 2 and 4.

 

jsut curious, what voltages did you apply?

VCore 1.1v

Ram Volts 1.35v

Cpu Volts 1.35v

[boggy77]

11 minutes ago, Hendricks3 said:

VCore 1.1v

Ram Volts 1.35v

Cpu Volts 1.35v

vcore shouldn't be 1.1. that's what's making your cpu slow. i'm not sure what the other cpu volt is that you're using. the dram voltage can stay at 1.35v, that's fine.

[Hendricks3]

5 minutes ago, boggy77 said:

vcore shouldn't be 1.1. that's what's making your cpu slow. i'm not sure what the other cpu volt is that you're using. the dram voltage can stay at 1.35v, that's fine.

weird didnt have these issues before with the 2600 so what should my vcore be?

[boggy77]

17 minutes ago, Hendricks3 said:

weird didnt have these issues before with the 2600 so what should my vcore be?

leave it on auto

[Hendricks3]

14 minutes ago, boggy77 said:

leave it on auto

kk will try and report back

 

[Hendricks3]

1 hour ago, boggy77 said:

leave it on auto

i just checked and everything was set to default when i swapped the cpu so idk what it might be